Resimac Resichem 501 CRSG NF


    We no longer stock this product, but can recommend Resimac Resichem 501 CRSG as a great alternative.

    Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

    Resichem 501 CRSG NF is a high build solvent-free epoxy coating designed for the long term protection of steel and concrete structures against corrosion and chemical attack.

    The coating can be applied to mechanical or abrasive blast clean surfaces and will cure at temperatures as low as 8°C

    Typical applications include: Pipelines, internal & external tank surfaces, chemical containment and bund areas, sheet and bearing piles, structural steel, chemical intake areas, process equipment.

    Please Note: Also available in Red - please contact us please contact us on 0113 2455450 (option 1) or send a message to [email protected] for details.

    Note: Colours are approximate and not a binding representation of the final product

    For professional use only.

    Product not available
    This Product has been Discontinued


    Features and Benefits

    • For professional use only
    • Brush or roller application
    • Tolerant of less than ideal surface preparation
    • At 250 microns Resichem 501 CRSG NF will have a theoretical coverage rate of 4m² per ltr per coat
      • Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
    • Typical applications include:
      • Cold water lines, process equipment
      • Pipework, internal & external tank surfaces
      • Chemical containment and bund areas
      • Sheet and bearing piles
      • Structural steel, chemical intake areas, process equipment, sumps
      • Machinery and external pipe surfaces
    • Suitable for use in immersed conditions at temperatures up to 60°C
    • Resistant to dry heat up to 200°C dependant on load
    • Resists attack by a wide variety of inorganic acids, alkalies, salts and organic media including:
      • Brine
      • Crude Oil
      • De-ionised Water
      • Diesel
      • Naphtha
      • Sodium Hydroxide 50%


    Please refer to the data sheets tab above for the product data sheet and application guide for in-depth information on using this product.


    Product Details

    Data sheet

    For Use By
    Professional Use
    For Use On
    For Use On
    Pack Size
    3.6L, 17L
    Mixing Ratio
    By weight: 3.48:1
    By volume: 2:1
    At 250 microns, a theoretical coverage rate of 4m² per ltr per coat.
    Heat Resistance (up-to)
    Up to 200°C (dry heat)
    UN Number (Activator)
    UN Number (Base)
    Suitable For Use On
    Suitable For Use On
    Application Method
    Application Method
    Product Range
    Fastest Delivery
    Next Working Day
    Maximum Overcoating Time
    10°C 36 hours
    20°C 36 hours
    30°C 18 hours
    40˚C 9 hours
    Minimum Overcoating Time
    10°C 12 hours
    20°C 6 hours
    30°C 3 hours
    40˚C 1.5 hour
    Usable Life
    10°C 70-80 minutes
    20°C 35-40 minutes
    30°C 15-20 minutes
    40˚C 7.5-10 minutes
    Chemical Immersion
    10°C 10 days
    20°C 5 days
    30°C 2.5 days
    40˚C 30 hours
    Water/Sea Water Immersion
    10°C 6 days
    20°C 3 days
    30°C 36 hours
    40˚C 18 hours
    Water/Sea Water Immersion
    Up to 60°C

    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

    Be the first to ask a question about this product!

    Question about the product

    * Required fields


    Resimac Resichem 501 CRSG NF is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT