Everbuild Black Jack 905 All Weather Roof Coating is a solvent based, full bodied black brushable compound with added fibres for reinforcement. It is specifically designed for overcoating leaking flat or pitched roofs. Dries to a tough black coating.
- Fast drying
- Unaffected by water immediately after application - can be applied when rain is imminent
- Can also be used to bond felt
- Brush applied
Areas For Use
Everbuild Black Jack 905 All Weather Roof Coating is an effective, general purpose roof coating. It is resistant to wash off by rain almost immediately after its application and is therefore ideally suited for winter use. Everbuild Black Jack 905 All Weather Roof Coating may be applied by brush to waterproof and re-seal many different types of roof coverings, including:
1. Asphalt roofs.
2. Built-up felt roofs.
3. Concrete roof decks.
4. Asbestos-Cement sheeting.
5. Metal sheeting, including iron, steel, zinc and lead.
6. Slates, tiles.
Everbuild Black Jack 905 All Weather Roof Coating may be used in conjunction with a rot-proof hessian reinforcement scrim or bitumen coated glass fibre scrim such as a Glass Membrane. Everbuild Black Jack 905 All Weather Roof Coating may also be used as a Vapour Barrier on walls and roofs.
- Do not apply to damp or wet areas use
Everbuild 906 Bitumen Roofing EmulsionEverbuild 906 Bitumen Roofing EmulsionEverbuild 906 Bitumen Roofing Emulsion
- Do not use in areas where subsequent solvent contact is likely
- Do not use in silage pits
- Avoid inhalation of vapours in confined spaces
- Allow sufficient drying time between coats
- 1.25m² per litre
- Touch Dry
- 24 hours
|Graham Fisher on 2019-02-25 12:57:41|| |
Halo there. Corrugated tin roof on my workshop. Has developed small leak in heavy rain; in area about 1metre sq. Not sure if sheets have perforated or if fixing screws have lost their seal. Minor drip into workhouse ( about a half-cupful after heavy rain) but annoying! Is this the stuff to permanently sort it, please? Many thanks ,... Graham Fisher, Herefordshire.
Everbuild 905 All Weather Roof Coating is sold in box quantities of 4 x 5lt, if you only have 1m² to do I would instead recommend Rust-Oleum Mathys Fillcoat Fibres which is available individually and should provide a better quality repair.
|brian ellis on 2018-09-24 13:23:40|| |
i have a log cabin (apex roof) there is a little leak coming through how can i seal it (its felt tiles) the cabin is 18ft x 10ft what do i need and how much will it cost please
After preparation, to apply the required 2 coats of Everbuild 905 All Weather Roof Coating (see product data sheet for full details) you would require 30 litres.
|Chris smyth on 2018-08-04 06:40:48|| |
I have a corrugated asbestos cement roof on a garage which has become porous. Is Evershield 905 the right product to use to seal it?
Carry out preparatory work. It is particularly important to ensure that the Asbestos-Cement is not saturated with water before protective coating commences. Wait until the Asbestos-Cement sheeting is dry and