Rust-Oleum Mathys Murfill Quartz
A long lasting, elastic, crack bridging and waterproof paint for exterior walls leaving a textured finish to exterior walls and facades. This Rust-Oleum product is extremely well suited to camouflaging damage, renovations and small surface unevenness. It is ready to use and simple to apply offering very attractive and even results.
Rust-Oleum Mathys Murfill Quartz is a long lasting, elastic, crack bridging and waterproof wall protection paint with a fine quartz structure. It provides a textured, waterproof surface coating to exterior walls and façades. Can be applied on substrates such as masonry, concrete, brick and cellular concrete. It will also repair small areas of damage or irregularities in the substrate.
Rust-Oleum Mathys Murfill Quartz is extremely suited to camouflaging damage, renovations and small surface unevenness. It is ready to use and simple to apply offering very attractive and even results.
Features & Benefits
- Excellent resistance against ageing in normal and industrial environment
- 100% Waterproof
- Water vapour permeable
- Fine quartz structure camouflages unevenness
- Protects steel reinforced concrete against carbonisation and corrosion
- Can be overcoated with water based paints
- Can be combined with Rust-Oleum Mathys Murfill Reinforcement Fleece for additional mechanical reinforcement and bridging of (active) cracks
Rust-Oleum Mathys Murfill Quartz can be applied directly on old, painted substrates (in good condition) after thorough brushing down. Chalking paints or non-painted substrates must be treated first (after high pressure water cleaning) with Mathys Pegafix. New or unpainted substrates: on porous materials apply first a coat of Rust-Oleum Mathys Primer 44 HS or with Mathys Pegafix. On smooth non-porous substrates apply a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer or a thin coat of Rust-Oleum Mathys Noxyde (except for white) diluted with 25% water.
- Cracks < 0.5mm wide: fill up with Rust-Oleum Mathys Murfill Quartz.
- Cracks > 0.5mm wide: fill up with Rust-Oleum Mathys Elastofill or Mathys Mur-Filler.
- Active cracks must be bridged with Rust-Oleum Mathys Murfill Reinforcement Fleece.
Mathys No.1 for Protective Coatings
A facade is the outer face of a building which is subjected to to many internal and external conditions like sun, wind and moisture. The possible causes of degradation are often hard to determine but can include: rising damp, moss, mould, algae and rusting structural reinforcements.
Durable protection and regular maintenance of your facades are of vital importance in preventing problems. Mathys therefore offers an extensive range of paints and coatings that will beautify and protect facades for years to come.
For more than four decades Mathys has been developing effective contemporary solutions for protecting, renovating and decorating facades. Mathys distinguishes itself through its expertise and unparalleled quality and has evolved worldwide into the first port of call for facade protection and decoration.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||0.4 - 1m² per kg|
|Touch Dry||4 Hours|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Carla Morgan on 25/02/2018|
My brother recommended your Murfill for my house opposite the sea. I would like to keep my lemon colour so would I paint over or do you have a colour range please. Thank you. Carla
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close