This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Top Features Excellent abrasion resistance Excellent chemical resistance Outstanding impermeability Single coat, self-priming capabilities
Jotun Premium Mur Filler
Jotun Premium Mur Filler is a silicone emulsion based undercoat, used for levelling out different substrate textures and to cover cracks in the substrate. It has a high permeability to water vapour and CO². It is used externally as an undercoat for Jotun Premium Mur Topcoat, where required, and it can be applied to both mineral and organic substrates.
Jotun Premium Mur Filler is a silicone emulsion based undercoat, used for levelling out different substrate textures and to cover cracks in the substrate. It has a high permeability to water vapour and CO². It is used externally as an undercoat for Jotun Premium Mur Topcoat, where required, and it can be applied to both mineral and organic substrates, for instance untreated and previously painted render. Bricks must be rendered before painting.
Features & Benefits
- Fills cracks up to a depth of 0.5mm
- Removes irregularities
- Increases the service interval
- Always finish with Jotun Premium Mur Topcoat
When treating masonry, make sure that the substrate is in a sound condition before commencing work. Surface cracks and damage should always be repaired before painting.
If you choose a high quality Jotun product, you can be assured that your property is well protected and it will be a long time before you need to paint again. Jotun products are specifically developed to penetrate and protect external masonry surfaces in extremes of climate. Wall renders are porous and easily absorb and transport moisture. When water freezes it expands and causes damage. It is therefore crucial to use masonry paint that allows water vapour to escape and provide optimal protection against moisture.
Jotun's Premium Mur Masonry System is based on a unique technology. A highly water repellent surface keeps walls dry while a thin film of paint allows walls to breathe. This combination provides long lasting protection for masonry.
Jotun's Premium Mur Masonry System gives an attractive, longer lasting finish. In addition this system provides optimal protection against moisture and frost. The system is open to water vapour diffusion and allows walls to breathe, while at the same time ensuring a water repellent surface.
Nano Technology Offers:
- Self-cleaning and minimises dirt retention.
- Crack bridging intermediate coat.
- Matt paint for all types of exterior render and previously painted masonry.
- Micro-porous paint, which allows walls to breathe and maximises life expectancy.
- Water repellent surface.
- Easy to apply, reduces application costs.
- Typical Coverage (per coat)
- 1-4m² per litre
- Touch Dry
- 4 Hours
Building sites are messy and busy places; with grouting, bricks being laid and cement being mixed, it makes for a cocktail of building mortar than can easily spoil existing surfaces, walls and floors. This is where the Mona-Clean Mortar Cleaner comes in, removing stains and spillage of cement, mortar and grout. Other Typical Uses Council repair work....
A two-pack polyurethane, clear coating and finish lacquer, for steel, non-ferrous metals, wood, concrete & mineral substrates free of contamination, dust, efflorescence and properly prepared. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Resistant to chemicals and weathering Use as an anti-graffiti coating on...
Sikagard 680 S Top Coat is a coloured, protective, one-part coating for concrete which protects against aggressive atmospheric influences and promotes a self-cleaning effect on the treated surfaces. It does not adversely influence the characteristic texture of the concrete.
An environmental friendly water based water repellent product, developed to impregnate mineral porous substrates. Water based and solvent free, so safe to work with. Secco® Hydro can be used to make bricks, concrete, fibre cement, mortar, etc. water repellent. It penetrates very deep in the surface you want to treat.
Bradite Floor Finish is a chlorinated rubber floor paint developed for concrete and steel floors. With a multitude of uses, the end result is a tough colourful floor. Advantages Abrasion resistant Water, chemical and oil repellent Resists fungal growth Available in RAL and BS colours ISO 9001:2008 & ISO 14001:200
Remmers Hydro Deep Primer is a water based, deep primer with strengthening and hydrophobizing properties used as a strengthening and water repelling primer for sanding, cementitious substrates such as P II and P III renders underneath Silicone Resin Filling Paint LA, Silicone Resin Paint LA, Concrete Acrylic and other synthetic resin bound coating systems.
Dilution for Keim Royalan, used to consolidate friable surfaces as a binder coat and as dilution for KEIM Royalan and KEIM Royalan Grob, and for equalisation or reduction of the absorbency of mineral substrates. Top Advantages Odourless and non-toxic Weather resistant Non-flammable UV and solvent resistant Resists fungal and mould...
Thermilate PRO Insulating Elastomeric Coating is a high quality water-based elastomeric membrane with revolutionary, enhanced composite which makes the paint insulate and reflect heat. PRO Elastomeric cures to form a seamless membrane sealing the surface and ensures unrivaled breathability.
Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting. Reduces oil...
Sol-silicate based, pigment-free additive for KEIM Design-Lasur. Used as thinner for Keim Design-Lasur to achieve translucent colour designs. For interior and exterior application. Top Features Weatherproof Resistant to environmental influences Mineral matt This product is available as POA. Click here to email us for more information
Remmers Funcosil SNL neutral odour is used as a hydrophobizing impregnation agent for porous, mineral building materials such as brick, sand-lime brick, mineral renders and light-weight concrete as well as silicate bound natural stone. It can also be used for subsequent impregnation of mineral paint coatings. Image already added
Remmers Funcosil SNL is a hydrophobizing impregnation agent for porous, mineral building materials such as fair-faced brick masonry work, sand-lime brick, mineral renders, aerated concrete and light-weight concrete.
This classic mineral paint from Keim, Granital is an effective paint for all exterior mineral surfaces. Top Advantages Resistance to UV, mould, fungae and algae Non-fading colours that are incombustible Highly water repellent and water vapor permeable Environmentally Friendly, ISO14001 This product is available as POA. Click here to...
Remmers Funcosil WS is used to hydrophobize porous, mineral building materials such as sand-lime brick, natural stone, fair-faced brick masonry work, mineral renders, aerated and light-weight concrete. It can also be used to subsequently treat water glass paint coatings. Single component, environment-friendly, water based impregnation agent....
Paint this picture: a new library has been built. A beautiful coloured brick has been chosen and it's your job to protect the brickwork from the elements but you must not change the colour of the brick. The Mona-Guard Plus is the coating you are looking for. Conforms to EN 1504-2 for added peace of mind. Reduces Penetration of oil/water. Organic...