Sikagard 700 S

Reference:

Manufacturer:

Sikagard 700 S is a siloxane based water repellent impregnation. Sikagard 700 S penetrates well into the open pores of the substrate, providing durable water repellency, while still allowing water vapour diffusion in both directions. It can be used as water repellent and colourless protective surface treatment for absorbent exposed materials.

Bulk Buy

£250.09 tax excl.

£300.11   tax incl.

Product Description

Sikagard 700 S is a one part water repellent impregnation for absorbent cementitious substrates. It penetrates well into the open pores of the substrate, providing durable water repellency, while still allowing water vapour diffusion in both directions. Sikagard 700 S complies with the requirements of EN 1504-2 for hydrophobic impregnation.

Uses:

Sikagard 700 S is used as a water repellent and colourless protective surface treatment for absorbent exposed materials such as concrete, cementitious rendering, concrete tiles, fibre cement, brickwork (clay and lime sand, non-vitrified), natural stone etc.

Sikagard 700 S can also be used as a hydrophobic primer under solvent based or emulsion protective coatings. Sikagard 700 S is used as a water-repellent impregnation (hydrophobic treatment) for absorbent substrates such as concrete in civil engineering or building concrete structures.

  • Suitable for protection against ingress
  • Suitable for moisture control
  • Suitable for increasing the resistivity

Features and Benefits:

  • Reduction of capillary water absorption
  • Reduces efflorescence
  • Reduces dirt penetration into the pores
  • Improves thermal insulation
  • Can be overcoated with solvent based and dispersion coating
  • Higher durability and resistance than conventional silicone based treatments
  • Does usually not change the appearance of the substrate
  • Reduces chloride ion ingress and movement
  • Does not act as a vapour barrier

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)0.375 - 0.625 l/m²
Touch Dry3 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable