

Sikagard 675 W ElastoColor is a protective coating for exposed concrete that is a one part acrylate anti-carbonation coating, which can be applied over existing coatings or directly onto the concrete surfaces.
Sikagard 675 W ElastoColor is a one part, plasto-elastic water dispersed coating based on styrene acrylate dispersion for the protection and enhancement of fairfaced concrete. It can be applied over existing coatings or directly onto the concrete surfaces. Sikagard 675 W ElastoColor complies with the requirements of EN 1504-2 as a protective coating.
Available in 9 RAL colours - other colours may be available, please contact us with your requirements on 0113 2455450 (option 2) or send a message to [email protected]
Uses:
Sikagard 675 W ElastoColor is used for protection and enhancement of concrete structures (normal and lightweight concrete), especially exposed concrete surfaces with a risk of cracking.
Sikagard 675W GB ElastoColor is used with concrete repair works as an elastic protective coating on Sika® smoothing mortar (refer to your product / system data sheet), fibre cement and overcoating of existing soundly adhering coatings.
Features and Benefits:
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
![]() | Question: I have a rendered finish to my house, which has developed cracks. What would you advise 're filling and then costing with your product with a top coat of weather proof paint to match rest of property? |
Answer: Prepare and prime the surface with either Sikagard 552 W Aquaprimer or Sikagard 551 S Elastic Primer - see product data sheets for which would be better suited for your substrate. Then Sikagard 545 W Elastofill followed by Sikagard 550 W Elastic. | |
![]() | Question: Hi what is the m2 coverage of 15l ?
and also when diluted to use as a primer ?
Thanks |
Answer: 97.5m² per 15L/per coat as a primer diluted 15% with water. 78m² per 15L/per coat as a topcoat undiluted. | |
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.