Mathys Pegafix is a colourless impregnating primer for porous, mineral substrates such as concrete, breeze block, bricks, etc. before painting them with waterborne paints. High fixing capacity Superior penetration characteristics Water based More Information **Available for delivery - see Delivery Options below**
Rust-Oleum Mathys Murfill Waterproofing Coating is an elastic, crack bridging and waterproofing exterior wall coating with a microporous structure that ensures the substrate is constantly able to breathe. Ready for use on a range of surfaces, it is simple to apply on any exterior wall, this water-based coating provides the highest protection and offers guaranteed waterproofing.
Click To Jump To Section:
- Features and Benefits
- Product Specification
- Drying Times
- Surface Preparation
- Application Methods
- Application Conditions
- Health and Safety
- 100% Waterproof - An exterior wall treated with Murfill Waterproofing Coating is guaranteed to remain bone-dry.
- 400% Elastic - The permanent elasticity protects your exterior wall optimally in all circumstances and prevents tears, flaking and blistering.
- 10 Year Waterproof Guarantee*
- Water vapour permeable - Murfill Waterproofing Coating always allows the substrate to breathe.
- Crack bridging - Excellent resistance against ageing and contamination in all weather conditions and climates.
- Protects reinforced concrete against carbonisation, penetration of chlorides and corrosion.
- Colourfast - The unique Murfill formula means that even deep and dark colours are not affected by sunlight.
- Water based - Low odour, minimal VOC's and environmentally friendly.
- Can be combined with Murfill fleece for additional mechanical reinforcement and for bridging of (active) cracks.
- 102 Ivory White
- 103 Light Pearl Grey
- 106 Cream
- 111 Light Grey
- 120 Rustic Beige
- 121 Egg-shell
|Rust-Oleum Mathys Murfill Waterproofing Coating|
|Densityy (g/cm³):||1,33 - 1,37 g/cm³ (wit)|
|Gloss level at 60ºC:||8%|
|Solids Content in weight:||60 - 63%|
|Solids content in volume:||47 - 50%|
|Recommended Wet Film Thickness:||300 μm (coverage: 400 g/m²)|
|Recommended Dry Film Thickness:||140 μm (coverage: 400 g/m²)|
|Theoretical Consumption:||In combination with fleece > 1,3 kg/m²|
|300 - 600 g/m² per coat depending on the application and the substrate|
|VOC Values:||25 g/l max|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Curing Schedule At 20º C/RV 50%|
|Touch Dry||Dry to Handle||Dry to Recoat||Fully Cured|
|45 minutes||± 8 hours||24 hours||± 2 days|
- Murfill Waterproofing Coating can be applied directly on old (sound) paintwork after thorough brushing down
- Chalking paints or substrates must be treated first with Primer 44HS or with Pegafix, when the old paint coat (acrylic paint or Murfill Waterproofing Coating) is affected by the solvents of Primer 44HS
- Newor unpainted substrates: on porous materials apply first a coat of Primer 44HS or Pegafix
- On smooth non-porous substrates apply a coat of Pegalink white or a coat of Noxyde (except for white) diluted with 25% water
- Cracks < 0.5 mm wide: fill up with Murfill Waterproofing Coating
- Cracks > 0.5 mm wide: fill up with Elastofill or Mur-Filler
- Active cracks must be bridged with Murfill fleece
|Directions For Use:||To ensure homogeneity, coating materials should be thoroughly stirred prior to use|
|Brush:||Do not dilute and apply in thick coat|
|Roller:||Do not dilute and apply in thick coat|
|Airless Spray:||If necessary, dilutewith 2 - 5% water Nozzle: 18 – 23 / Pressure: 200 bars|
|Air-Atomised Spray:||Not possible|
|Cleaning Of Equipment / Spills:||Water|
- Minimum temperature: 5°C / Maximum 80% R.H
- Interior / Exterior Use
- Water / Solvent Based
- Application Method
- Brush, Roller, Spray
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Pack Size
- 6KG, 15KG
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- ± 8 hours
- Dry to Handle (at 20°C)
- 8 hours
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 2 Days
- 1.5 - 3m² per kg
- Min. Application Temperature
- Solids by Volume
- 47 - 50%
- 25 g/l max
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Recommended Dry Film Thickness
- 140 μm (coverage: 400 g/m²)
- Recommended Wet Film Thickness
- 300 μm (coverage: 400 g/m²)
- UN Number
- Not regulated
- Solids by Weight
- 60 - 63%
|Abdulkareem Lafene on 2021-03-15 09:43:38|| |
I have an exterior wall which has been painted previously, some of the paint has been scraped back to bare brick but some sound paint remains there are also patches of fresh mortar where the pointing has been repaired. Should I use a primer or can I paint directly onto the surface. Also will any primer affect breathability? Thanks
Yes a primer will be required.
If the bricks are non porous you will require Rust-Oleum Mathys Pegalink Universal Adhesion Primer.
These will not effect the breathability of the paint.
|Carol on 2021-01-26 17:53:18|| |
I want to paint a new unpainted block wall suffering from water ingress How do I know which primer to use, pegafix or 558-rust-oleum-mathys-primer-44-hs
For application to a bare block work wall assuming it is porous, clean, dry, sound and prepared as detailed in the Technical Data Sheet we would recommend priming with Rust-Oleum Mathys Primer 44 HS or Mathys Pegafix.
|Alex on 2020-11-17 18:45:43|| |
Is this paint suitable to apply to stone window ledges (external)? The existing paint has peeled off, so I would remove all the existing chipped paint and be applying to bare stone...?
Assuming the stone window ledge is clean, dry, and sound, then yes it can be used on the window ledge with the correct primer applied first.
If the stone is porous prime first with Mathys Pegafix.
If the stone is not porous priming with Rust-Oleum Mathys Pegalink Universal Adhesion Primer would be required.
|Ian mitchell on 2020-06-11 09:33:54|| |
Can you use this paint, to paint a wooden fence
This paint is design for masonry, assuming the timber fence is clean, dry and sound we can recommend Zanders PF59 Stain Blocking Primer Finish on bare timber followed by Wethertex OT25 Wood-Flex Satin Opaque Timber Paint.
|Alistair Goligher on 2020-05-20 12:22:39|| |
Hi Does this paint have to be stirred before application ? Regards Alistair
Yes, to ensure homogeneity, coating materials should be thoroughly stirred prior to use.
|Alistair Goligher on 2020-02-21 13:50:15|| |
Hi Which paint would be better for a pebble-dashed wall, Rust-Oleum Mathys Murfill or Zinsser Watertite ? Thank you Alistair
Rust-Oleum Mathys Murfill Waterproofing would be used in an external waterproofing application, Zinsser Watertite would be used internally only.
|Nathan Stroud on 2019-12-19 23:04:10|| |
Hi I want to use the rust olium murfil waterproof exterior paint on the side of my house but it's mid winter. How many clear day do I need? Do I need to apply on consecutive days and how much do I need for an 8m x 4m wall? Kind regards Nathan
Application of a water based product like this would not be possible at this time of year. The minimum application temperature for Rust-Oleum Mathys Murfill Waterproofing Coating is 5°C and maximum 80% R.H.
Drying Times At 20°C/RH 50%
|teni begi loju on 2019-11-11 23:39:06|| |
Is this product effective in use for waterproofing pebble-dashed walls? If so, what colour would be best so as to minimise the colour change?
Rust-Oleum Mathys Murfill Waterproofing Coating is suitable for use over pebbledash walls, depending on the level of porosity Rust-Oleum Mathys Primer 44 HS may be required to prime the surface first. You can choose whichever colour you like from the range as this will not affect performance.
|Lauran on 2019-10-27 10:01:37|| |
Our home is externally painted with typical white paint (previous owners did this) What can we use to paint over/coat the exterior walls that are already painted that will waterproof the exterior walls?
Rust-Oleum Mathys Murfill Waterproofing Coating would be an excellent choice for this.
|Steven on 2019-09-29 10:08:17|| |
I have recently repainted my house. There is a slight water penetration in a small area in very rainy conditions. Can I use the product and repaint over with ordinary masonry paint?
Ideally Rust-Oleum Mathys Murfill Waterproofing Coating should be left as the final finish. Overcoating with other masonry paints can cause issues due how flexible Rust-Oleum Mathys Murfill Waterproofing Coating remains over time.
|ALEX FARMER on 2019-08-28 12:02:20|| |
Hi can Murfill waterproofing coating be used on timber as i'm looking to get the same colour on my timber cladding as i use on the house & If so do i need to pre-coat it with anything Regards Alex
This is not something we would normally recommend, but it could be done if you wished so long as it was timber, and not hard woods and not varnished or similar. We wouldn’t use anything else prior to Rust-Oleum Mathys Murfill Waterproofing Coating, but certainly would dilute the first coat quite a bit to ensure it “sinks in” to the wood.
Preferably you would use a dedicated timber product for the wood areas such as Mathys Pegacryl Satin mixed to the same colour - yes there would likely be a slight colour variance but performance wise this would be much preferred.
|ALEX FARMER on 2019-08-15 14:11:09|| |
Hi what is the best preparation for painting unpainted facing block ?? Regards Alex
Rust-Oleum Mathys Murfill Waterproofing Coating can be applied directly on old (sound) paintwork after thorough brushing down. Chalking paints or new/unpainted substrates must be treated first with Rust-Oleum Mathys Primer 44 HS or with Mathys Pegafix, when the old paint coat (acrylic paint or Murfill Waterproofing Coating) is affected by the solvents of Rust-Oleum Mathys Primer 44 HS. On smooth non-porous substrates apply a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer or a coat of Rust-Oleum Mathys Noxyde (except for white) diluted with 25% water. Cracks < 0.5mm wide: fill up with Murfill Waterproofing Coating. Cracks > 0.5mm wide: fill up with Rust-Oleum Mathys Elastofill or Mathys Mur-Filler. Active cracks must be bridged with Rust-Oleum Mathys Murfill Reinforcement Fleece.
|John on 2019-06-21 13:35:03|| |
I had Murfill Cream exterior "elastic" paint applied to my home 5 years ago and it still looks fresh apart from a gable end that gets direct weather. This gable is in need of a clean. What do recommend to clean it without affecting the integrity of the paint? Also, I had my window ledges painted in a reddish colour. Do you supply this? Thank you.
We'd need more information on what you require for your window ledges if you wish to contact our Technical Team on 0113 2455450 (option 2) or [email protected], but to clean the existing surfaces coated with Rust-Oleum Mathys Murfill Waterproofing Coating we'd recommend a 2% concentration of Rust-Oleum Mathys ND14 Cleaner Degreaser.
|Glyn Jones on 2019-06-19 10:15:31|| |
Hi Do you have the magnolia colour for the waterproof paint?
Yes, this would be 'BS08B15' on the colour picker for this product.
|George Hendrie on 2019-02-24 20:00:42|| |
Hi there. I was wondering if you do any samples for the waterproof coating paint?
Yes there is a brochure which has some applied samples of the various versions of the product if you would like to provide an address we can post to.
|terry.denning on 2019-02-18 10:35:13|| |
Is this product suitable for painting over Santex cream paint as a protector for damp on exterior walls? will it help to keep out rain water.
Rust-Oleum Mathys Murfill Waterproofing Coating is simple to apply on any exterior wall, this water based coating provides the highest protection and offers guaranteed waterproofing. It can be applied directly on old (sound) paintwork after thorough brushing down. Chalking paints or new/unpainted substrates must be treated first with Rust-Oleum Mathys Primer 44 HS or with Mathys Pegafix, when the old paint coat (acrylic paint or Murfill Waterproofing Coating) is affected by the solvents of Rust-Oleum Mathys Primer 44 HS. On smooth non-porous substrates apply a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer or a coat of Rust-Oleum Mathys Noxyde (except for white) diluted with 25% water.
|Ben griffiths on 2018-03-31 09:39:28|| |
We have recently purchased a new property with stand alone building built in 1990's - it has external concrete render which has never been painted for some reason. The interior walls have faint traces of damp after this recent wet weather - what is best - simple masonary paint or something stronger and more waterproofing. The render still looks in good condition.
We would always recommend a high performance product like Rust-Oleum Mathys Murfill Waterproofing Coating. Once clean and dry the bare concrete render should first be primed with Rust-Oleum Mathys Primer 44 HS before the application of Rust-Oleum Mathys Murfill Waterproofing Coating.
|John ashton on 2018-03-13 17:47:24|| |
Hi I'm looking for a waterproof Paint or resin the building is already painted with a water based paint there is a lot of damp, so Im looking for a resin to put on then paint or a waterproof paint the colour is magnolia, the building is a old large Manor house could you help me please regards John
Rust-Oleum Mathys Murfill Waterproofing Coating can be applied directly on old (sound) exterior wall paintwork after preparation. It is elastic, crack bridging and 100% waterproof but will still allow the wall to breathe outwards.
|Lydia on 2017-10-21 20:43:14|| |
Question: I want to use Murfill but before I buy 16kg of it, do you do sample pots of the colours? As it may look completely different colour on walls than it does on computer image. Also I have cracked matt painted pebble dashed type render that is probably 1920's (Old) what would be the best primer to use before this? Thanks
Rust-Oleum Mathys Murfill Waterproofing Coating can be applied directly on old (sound) paintwork after thorough brushing down. Chalking paints or new/unpainted substrates must be treated first with Rust-Oleum Mathys Primer 44 HS or with Mathys Pegafix, when the old paint coat (acrylic paint or Murfill Waterproofing Coating) is affected by the solvents of Rust-Oleum Mathys Primer 44 HS. On smooth non-porous substrates apply a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer or a coat of Rust-Oleum Mathys Noxyde (except for white) diluted with 25% water.
Samples are not available for this product but we can send out a RAL chart upon request.
|Graham Patient on 2017-08-12 14:48:00|| |
Question: Can I use Murfil waterproof paint on interior shower walls?
|Richard Ward on 2017-06-11 17:53:27|| |
Question: I want to use Murfill on concrete as the previous paint has peeled off, what primer should I use, the site is exposed and near the coast. Thank's
|Matt Stocker on 2016-09-17 18:42:40|| |
Question: I can't find the details of how long I need to allow for the paint to dry before it is waterproof and safe to be rained on. Just trying to plan around the weather! Data sheet only mentions handling time and recoat time, but no mention of waterproof time. If you'd be able to let me know, that would be great.
When the full specified system has been applied (usually 1 x primer and 2 x Murfill Waterproofing Coating) and the final paint layer has dried sufficiently as per the Product Data Sheet (usually 24 hours at 20°C) then the system will be providing waterproof protection of the building.
In good drying conditions (20°C/50% R.H.) then Murfill Waterproofing Coating should be 'rain proof' after 6 hours. Please note that fluctuations in weather/conditions/temperatures/etc. will affect these estimates greatly.
Mathys Mur-Filler is an elastic joint filler that contains quartz for the preparation of active and non-active cracks, can be used interior and exterior. Elastic High filling power Not sandable (contains quartz) More Information **Available for delivery - see Delivery Options below**
A reinforcement fleece for the first coat of Murfill Waterproofing Coating on structural surfaces where required. When fleece is introduced it offers maximum durability, flexibility and strength to the system. Made out of polyamide fibres Available in woven in block meshes or non-woven Typically rolled/brushed into the first coat while...
Rust-Oleum Mathys Noxyde is a single pack, water-based elastomeric coating with unequaled corrosion protection designed for spraying, offering 20 years of protection with excellent waterproofing and elasticity. Primer and topcoat in one 16 colours available Impact resistant Prevents rust from spreading UV resistant and protects against...
Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible Chlorinated rubber technology, solvent-based Quickly water-resistant (1 hour after application at 20°C)...
Rust-Oleum Mathys Pegalink Universal Adhesion Primer is a water based primer for indoor and outdoor use. Adheres to many surfaces: wood, gypsum, cement, bricks and especially on smooth and difficult to adhere to surfaces like: galvanised steel, copper, zinc, polycarbonate, hard PVC, Pegagraff Hydro, etc. Excellent adhesion Flexible...
Rust-Oleum Mathys Elastofill is an elastic jointing paste based on acrylic dispersions for filling up cracks, crevices or fissures with periodically varying width, that forms a rubber-like mass with permanently high elasticity (>900%) after evaporation of the water. Used for for sealing, jointing, filling fixing and gluing Can absorb...