Zinsser AllWeather Exterior Masonry Paint is an ultimate performance, exterior masonry paint to be used on bare or previously painted masonry at low temperatures.
Available in 4,100+ colour options, including RAL, NCS and BS shades
Flat matt breathable finish
Resists attack by alkalis and acid
Resists dirt accumulation
Can be applied down to -5°C
Showerproof in 20 minutes
3 hour re-coat
Self-priming
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
Zinsser AllWeather Exterior Masonry Paint is an ultimate performance, exterior masonry paint that can be used on bare or previously painted masonry at low temperatures. Designed for the long term decoration of bare or previously painted concrete, render, stone and brickwork. Self-priming.
It contains a biocide to protect the dried coating against fungal degradation. AllWeather Exterior Masonry Paint gives excellent resistance against cracking, blistering and flaking and protects against rain and severe weather. AllWeather Exterior Masonry Paint provides a long lasting finish, is easy to apply and has excellent colour retention. It dries even in low temperatures so can be used all year round.
Recommended Uses
Exterior masonry surfaces
New painted render
Previously painted render
Stucco
Brick
Stone
Cured concrete
In many instances AllWeather Exterior Masonry Paint is self-priming and will bond to existing paints without sanding so for many refurbishing jobs there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllWeather Exterior Masonry Paint will ensure that any exterior looks bright and beautiful for years.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Yes this product can be applied by brush, roller or airless spray application.
colin abrahams on 2021-05-24 17:22:04
Question:
hi could you tell me is this product 100% water proof its for a previously painted modular home
Answer:
This paint gives excellent resistance to rain and severe weather, but does not state 100% waterproof.
Garry Carden on 2019-05-31 17:37:09
Question:
Can you tell me is this product suitable for lime render Thank you
Answer:
Yes, Zinsser AllWeather Exterior Masonry Paint (Solvent Based) is fine for exterior lime render. If it is bare, i.e. unpainted, thin the first coat 10% with Bartoline White Spirit as a sealer coat.
Julie Marsden on 2019-01-19 13:49:38
Question:
Hello - Does the Zinsser All Weather Exterior paint cover hairline cracks in the render?
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage