• Zinsser AllWeather Exterior Masonry Paint (Solvent Based)

Zinsser AllWeather Exterior Masonry Paint (Solvent Based)

ZN7420002A1
ZIN2417

Zinsser AllWeather Exterior Masonry Paint is an ultimate performance, exterior masonry paint to be used on bare or previously painted masonry at low temperatures.

  • Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
  • Flat matt breathable finish
  • Resists attack by alkalis and acid
  • Resists dirt accumulation
  • Can be applied down to -5°C
  • Showerproof in 20 minutes
  • 3 hour re-coat
  • Self-priming

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Coverage Calculator

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£74.14(ex. VAT)
£88.97 (inc. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

Zinsser AllWeather Exterior Masonry Paint is an ultimate performance, exterior masonry paint that can be used on bare or previously painted masonry at low temperatures. Designed for the long term decoration of bare or previously painted concrete, render, stone and brickwork. Self-priming.

It contains a biocide to protect the dried coating against fungal degradation. AllWeather Exterior Masonry Paint gives excellent resistance against cracking, blistering and flaking and protects against rain and severe weather. AllWeather Exterior Masonry Paint provides a long lasting finish, is easy to apply and has excellent colour retention. It dries even in low temperatures so can be used all year round.

Recommended Uses

  • Exterior masonry surfaces
  • New painted render
  • Previously painted render 
  • Stucco
  • Brick
  • Stone
  • Cured concrete

In many instances AllWeather Exterior Masonry Paint is self-priming and will bond to existing paints without sanding so for many refurbishing jobs there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of AllWeather Exterior Masonry Paint will ensure that any exterior looks bright and beautiful for years.

Product Details
2417-897834

Data sheet

Manufacturer
Zinsser
For Use By
Consumer Use
Interior / Exterior Use
Exterior
For Use On
Masonry
Concrete
Stucco
Brick
Stone
Application Method
Brush
Roller
Spray
Sheen
Matt
Pack Size
5L
Application
Brush, Roller, Spray
Coverage
12m² per litre
Touch Dry
3 Hours
UN Number
UN1263
Colour(s)
Fully Tintable
Base Type
Solvent-Based
Exterior / Interior Use
Exterior Use
Suitable For Use On
Masonry
Suitable For Use On
Stucco
Suitable For Use On
Stone
Suitable For Use On
Concrete
Suitable For Use On
Brick
Finish
Matt
Application Method
Roller
Application Method
Brush
Application Method
Spray
Manufacturer
Zinsser
Components
1K
Usages
All-Surface
Product Type
Topcoat
Fastest Delivery
Next Working Day
Colour Family
Anthracite Grey
Colour Family
Pink
Colour Family
Cream
Colour Family
Purple
Colour Family
Grey
Colour Family
Off-White
Colour Family
Blue
Colour Family
White
Colour Family
Brown
Colour Family
Chartwell Green
Colour Family
Orange
Colour Family
Beige
Colour Family
Yellow
Colour Family
Green
Colour Family
Black
Colour Family
Red
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Tim on 2023-09-05 11:03:06
Question: 

I know this is hard to say, but on a previously painted wall typically how many coats would you expect need to be applied. Is one coat enough?

Answer from Rawlins’ Technical Team: 

Assuming the surface is clean, dry and any existing coating is sound, then two coats of this product are recommended for application in accordance with the technical data sheet.

questions Graham Wyles on 2023-05-07 11:22:37
Question: 

I have an exterior wall where metal edgings have rusted.I plan to use a rust converter and two coatings metal primer paint. Then re paint the whole wall including the metal paint primed bit with the exterior Zinsser exterior masonry paint. Can you confirm this will work OK and maybe offer a novice any tips? Thanks GrahamWyles

Answer from Rawlins’ Technical Team: 

This product can be applied to masonry, but it is not resistant to corrosion coming through from the metal edging. 

In most cases the corrosion may return if the edging is not replaced for a plastic version. 

We would recommend to test on a small area prior to full application for compatibility and adhesion between your choosen metal primer and the masonry paint.

questions Neil on 2022-07-26 10:21:33
Question: 

I have a buamit render on one wall, can you scan in a swatch colour match this paint for another wall, if so how do do I do tjhat

Answer from Rawlins’ Technical Team: 

Unfortunately scanning a sample is not currently a service we can offer, we would recommend viewing a physical RAL, NCS or BS colour chart to choose a suitable match.

We have these available to view on our trade counter in Leeds or to purchase here.

questions Nick cook on 2022-01-17 11:30:07
Question: 

Can this paint be sprayed on to the walls

Answer from Rawlins’ Technical Team: 

Yes this product can be applied by brush, roller or airless spray application.

questions colin abrahams  on 2021-05-24 17:22:04
Question: 

hi could you tell me is this product 100% water proof its for a previously painted modular home

Answer from Rawlins’ Technical Team: 

This paint gives excellent resistance to rain and severe weather, but does not state 100% waterproof.

questions Garry Carden on 2019-05-31 17:37:09
Question: 

Can you tell me is this product suitable for lime render Thank you

Answer from Rawlins’ Technical Team: 

Yes, Zinsser AllWeather Exterior Masonry Paint (Solvent Based) is fine for exterior lime render. If it is bare, i.e. unpainted, thin the first coat 10% with Bartoline White Spirit as a sealer coat.

  

Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Zinsser AllWeather Exterior Masonry Paint (Solvent Based) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery