Remmers Color Flex (Elastoflex Façade Paint)
Remmers Color Flex (formerly Elastoflex Facade Paint) is a highly elastic, silicone resin reinforced facade coating with a film preservative for surfaces at risk of algae and fungi.
- Non-yellowing - Colour stable
- High crack-bridging capacity
- Can be used as an elastic intermediate and finishing coat
- Water vapour permeable - Weather resistant
- 280+ colours available
- Choose from RAL, NCS, and British Standard shades
Product customisationDon't forget to save your customization to be able to add to cart
Remmers Color Flex (formerly Elastoflex Facade Paint) is a highly elastic, silicone resin reinforced facade coating with a film preservative for surfaces at risk of algae and fungi. Remmers Color Flex is a very versatile, highly elastic coating. Along with good water vapour diffusion capacity, it is highly impermeable for carbon dioxide and liquid water (driving rain and splash water). The paint is nonyellowing, extremely weather resistant, has no tendency to soil and is saponification stable.
Remmers Color Flex is easy to apply and is distinguished by high crack-bridging capacity. Because of its properties, especially when used in combination with Funcosil BI, Color Flex can be used for water repelling, CO2 impermeable, protective coatings in concrete restoration, on synthetic resin bound as well as cement bound render systems.
It is possible to coat over load bearing, old coatings on a mineral or synthetic resin base that adhere well. In many cases, this eliminates the expensive removal of old coatings. Color Flex can be used as an elastic intermediate and finishing coat, with or without reinforcement, on cracked facade surfaces (crack groups I and II in the relevant BFS Codes of Practice) made of cement bound, mineral renders (DIN 18550) P II and P III with a compressive strength of > 7 N/mm².
- For Use By
- General Use
- Suitable Substrates
- Concrete, cement
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 0.25ml per m²
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 12 Hours
- UN Number
- Fully Tintable
- Base Type
- Exterior / Interior Use
- Exterior Use
|William on 2021-09-16 16:16:13|| |
Will Remmers Color Flex paint work well over render that was painted 5 years ago with good quality masonry paint? The paint and render are in good condition. However, there is some damp penetration in severe weather which we would like to eliminate.
It is possible to coat over load bearing, old coatings on a mineral or synthetic resin base that adhere well.
We would recommend testing for compatibility and adhesion prior to full application.