- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Bradite Bitumen Coat/Finish
We no longer stock this product, but can recommend Teamac Metalastic Black Bituminous as a great alternative.
We no longer stock this product, but can recommend Teamac Metalastic Black Bituminous as a great alternative.
Bradite Bitumen Coat/Finish is a gloss coating intended for substrates which are dry and free of contamination. It works by furnishing a tough hard-wearing film over the substrate that provides excellent water repellency. Ideal for use on substrates such as:
- Steel
- Non-ferrous metals
- Concrete
- Brick
- Asphalt
- Felt roofing
With the exception of fish ponds and drinking water, this coating is ideal for water immersion systems, such as water storage, and many a usage within industrious environments can be found with this in mind.
Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
This coating is available in silver with solar reflective properties. If you require this additional feature, please see Bradite Solar Reflective Bitumen (BS59)
Features & Benefits
- Provides a tough hard-wearing film over the substrate.
- Excellent water resistant properties.
- Confirms to BS 3416 and BS 6949, Type 1 Class A.
- Fast-drying.
- Only one coat required.
- High build coating.
- Can be applied at temperatures 10°C and above (must be above 3°C above due point).
Preparation
High pressure steam cleaning to remove all loose, flaking paint and contamination back to a sound surface. Bradite TD39 industrial strength detergent, washing and rinsing should be used with scrubbing to remove grease or oil.
Remove all rust scale, loose mill scale or other corrosion products by scraping and mechanical cleaning to SIS-St 3 (ISO 8501-1:1998).
Intact areas of existing coatings should be roughened by abrasive manual or disc sanding, feathering back to a sound coating edge. Cracks and pits should be filled using a suitable metal filler before painting. Substrate should be dust free and completely dry before coating.
Application
Application and use should always conform to the codes of practice described in BS 6150 and BS 5493
Brush and Roller: supplied ready for use. Use natural bristle brush, tapered and flagged, for best appearance. Thin, if required, with 0-5% Bradite Thinner TW35.
Conventional Air Spraying: Thin with 0-25% Bradite Thinner TW35 as required, tip size – 2.0 mm, tip pressure 60psi (0.4MPa) approximately.
Airless Spraying: Thin with 0-10% Bradite Thinner TW35 as required, tip size - 23 thou (0.58mm) approximately, tip pressure - 2100 psi (15MPa) approximately.
Clean all equipment immediately after use with Bradite Thinner TW35 for best results.
Data sheet
- Application
- Brush, Roller, Spray
- Coverage
- 16m² per Litre
- Touch Dry
- 4 Hours
- Brand
- Bradite
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bradite Bitumen Coat/Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT