Keim Silan 100
  • Keim Silan 100

Keim Silan 100

KEI1010

Keim Silan 100 is a solvent-free, silane-based water repellent for use on all mineral substrates, particularly suitable for concrete, where carbonation resistance is required. 

  • For use on all mineral substrates
  • Solvent-free alkylalkoxysilane
  • Active component content 100%

This product is available as POA. Click here to email us for more information

Colour
Size
Quantity

Description

Keim Silan 100 is a solvent free, silane-based water repellent for use on all mineral substrates, particularly suitable for concrete, where carbonation resistance is required.

Concrete carbonation is caused by carbon dioxide in the environment reacting with the calcium hydroxide in the cement paste, causing the pH to drop to a point where reinforcing steel can start to erode. The speed of this process is determined by the quality of the concrete.



Top Features & Benefits


The features listed below give you a quick snapshot of what Keim Silan 100 offers:

  • Water repellent.
  • silane-based.
  • For use on all mineral substrates.
  • Solvent-free alkylalkoxysilane.
  • Active component content 100%



Preparation & Application


Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.

Application
Keim Silan 100 should be applied as two wet-on-wet flood coats or as a single flood coat, by brush or low-pressure spray. If required, within a period of up to twelve hours, and these times are critical, the first coat of Keim Mineral Paints must be applied. Non-absorbent surfaces cannot be treated with Keim Silan 100. Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain. Cleaning of tools

Clean tools with solvent immediately after use.

Product Details
KEI1010

Data sheet

Application
Brush or Low-Pressure Spray
Coverage
0.2lt/m2 for one coat, 0.3lt/m2 for two coats.
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send