Bedec Extra-Flex Elastomeric Masonry Paint
Bedec Extra-Flex Elastomeric Masonry Paint is a high performance, water based, microporous, flexible masonry paint.
- Superb flexibility
- Water based
- Exterior Use
- Combats cracking
- Weather resistant
- One pack
- Easy clean
Bedec Extra-Flex Elastomeric Masonry Paint is a high performance, water thinnable microporous masonry coating, designed for exterior application affording excellent flexibility and weather resistance. Bedec Extra-Flex Elastomeric Masonry Paint is ideally suited for the protection of exterior masonry, roughcast, pebble-dash, brickwork, cement and concrete rendered surfaces.
Bedec Extra-Flex Elastomeric Masonry Paint can be applied to previously painted surfaces after suitable preparation. This modified acrylic blend is a flexible microporous protective coating that will flex with the substrate where movement causes cracking in conventional masonry paint.
- Concrete rendered surfaces
- Previously painted surfaces
*Not suitable for engineering bricks.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Bryan Ragless on 06/09/2018|
My father in law owns a park home , with slight movement in weather changes little ( very small ) cracks appear in paint on exterior walls , wondering if your flexible Paint would suit ? Thanks Bryan
As long as the surface in question is suitable for Bedec Extra-Flex Elastomeric Masonry Paint to be applied to, first make good any cracks, joints, gaps, etc. with Rust-Oleum Mathys Elastofill then apply Bedec Extra-Flex Elastomeric Masonry Paint as required.
|lydia on 06/01/2018|
It states on datasheets prepare walls with stabilising solution, would sandtex stabilising solution be ok to use? Many thanks
We would recommend Blackfriar Stabilising Solution.
|Mark on 15/05/2017|
Question: Can this paint be mixed to colour match
Yes, there is an additional charge for specially mixed colours (£12.00 + VAT per order) but it can be produced in most RAL and BS colours.
Should you wish to order, please contact our Sales Team on 0113 2455450 or [email protected]
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close