- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Rust-Oleum Mathys Paracem Semi-Gloss
28.MM.4
Rust-Oleum Mathys Paracem Semi-Gloss is a high quality acrylic wall paint for outside and inside use. Ideal for old or new substrates like masonry, cement rendering or plaster, concrete, tiles, plaster boards and wooden panels.
- For indoor and outdoor works
- Very decorative semi-gloss aspect
- Easy to clean and to maintain
- High filling and hiding power
- Excellent flow out
- Very high durability and gloss stability
- Unsaponifiable
- High durability
- Particularly high covering capacity
- Sufficiently breathing (water vapour permeable)
- Excellent weather resistance
- Availabe in 50+ RAL and BS colours
Description
Rust-Oleum Mathys Paracem Semi-Gloss
Rust-Oleum Mathys Paracem Semi-Gloss is a high quality acrylic wall paint for outside and inside use. Ideal for old or new substrates like masonry, cement rendering or plaster, concrete, tiles, plaster boards and wooden panels.
Features & Benefits
- For indoor and outdoor works
- Very decorative semi-gloss aspect
- Easy to clean and to maintain
- High filling and hiding power
- Excellent flow out
- Very high durability and gloss stability
- Unsaponifiable
- High durability
- Particularly high covering capacity
- Sufficiently breathing (water vapour permeable)
- Excellent weather resistance
| Technical Data | |
|---|---|
| Density: | 1,28 - 1,32 |
| Gloss Level: | Satin |
| Gloss level at 60º: | Semi-Gloss: 65% |
| Solids content in volume: | 35 - 38 % |
| Solids Content in weight: | 50 -53 % |
| Drying Times At 20°C/RH 50% | |
|---|---|
| Touch Dry: | 40 minutes |
| Dry To Handle: | 2 hours |
| Dry To Recoat: | 4 hours |
| Fully Cured: | 1 day |
Theoretical Consumption
8 - 10 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application
Surface Preparation
The substrate must be sufficiently dry (max. 4% moisture content) and stable. Clean walls thoroughly with steel brush or high pressure water cleaning. In case of fungal growth: treat the walls first with an adequate moss-preventing product.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
28.MM.4
Data sheet
- Application
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 2 Hours
- Dry to Recoat (at 20°C)
- 4 Hours
- Fully Cured (at 20°C)
- 1 Day
- Coverage
- 8-10m² per litre
- Min. Application Temperature
- 5°C
- Density
- 1,28 - 1,32
- Solids by Volume
- 35 - 38 %
- VOC
- 15 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 40 Mins
- Recommended Dry Film Thickness
- 45 µm
- Recommended Wet Film Thickness
- 125 µm
- UN Number
- Not regulated
Be the first to ask a question about this product!