Axalta Stormcote Stabilising Sealer is a solvent based pigmented sealer for masonry.

Approvals

• Conforms to Category (h) of 2004/42/EC which carries a VOC limit of 750 g/lt
• This coating has not been tested to the standard of the new regulation 7(2) of the Building Regulations 2010, which came into force in Dec 2018

Click To Jump To Section:

• Features and Benefits
• Product Specification
• Drying Times
• Surface Preparation
• Application Methods
• Application Conditions
• Health and Safety

Features and Benefits

• Ideal for stabilising and bonding interior and exterior masonry and cement surfaces prior to the application of masonry paint or other similar coatings
• Reduces porosity and provides a well- bound base with excellent alkali resistance
• Can be used alonside Axalta Plicote HB Finish

Product Specification

Drying Times

• Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation

Surface Preparation

• Surfaces should be clean, dry and free from all grease, oil, loose material and general contamination
• Unsound surfaces should be scraped back to firm edge
• If algal or fungal contamination is present, wash with a bleach solution (observing necessary safety precautions)

Application Methods

• Do not apply to damp or frosted surfaces
• One full coat should suffice for most applications, but a second may be applied in cases of severe porosity

Application Conditions

• Only apply in conditions of good ventilation which must be maintained during drying and curing.
• Do not apply when rain, mist, sleet, or snow are imminent
• During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the surface temperature should remain at least 3°C above the dew point
• Paint temperature should ideally be at a minimum of 15ºC

Health and Safety

• Containers are provided with safety labels which should be observed.
• Further information about hazardous influences and protection are detailed in individual safety data sheets
• Refer to the product data sheet and safety data sheet in the attachments section above for further details.