1,600 colours ideal for harbour buildings, seafront housing, hotels, marina walls, boatyards and any area susceptible to extreme weather or carbon pollution, with up to 30 years life expectancy and outstanding resistance to weathering and UV. Extremely flexible, with good CO² and other acid gas resistance.
Tested to BS 476 Parts 6 and 7 and meets Class ‘0’
Environmentally friendly, water-borne, high performance exterior coating with outstanding anti carbonation properties
For use on concrete, cement render, most masonry surfaces, and metals with a suitable primer
Dirt repellent and resistant to fungal growth, excellent salt, alkali and acid resistance
Waterproof, blister proof and protects against oil and grease
Please note:Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Glixtone AC1 High Performance Smooth Masonry Paint is a high performance, water-borne, exterior coating with outstanding anti carbonation properties. For use as a weather-resistant protective and decorative finish for concrete, cement render, most masonry surfaces, and metals with a suitable primer.
Glixtone AC1 High Performance Smooth Masonry Paint is formulated to the very highest standards for durability and cost effectiveness and enhances the exterior appearance of buildings, whilst providing an exceptional level of protection from the elements. Suitable for harbour buildings, seafront housing, hotels, marina walls, boatyards and any area susceptible to extreme weather or carbon pollution.
With up to 30 years life expectancy and outstanding resistance to weathering and UV, Glixtone High Performance Smooth Masonry Paint offers a long lasting environmentally friendly protective finish.
Glixtone High Performance Smooth Masonry Paint is available in White and 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours.
Please Note - This product is also available in 10L and 20L sizes subject to Minimum Order Quantities and extended lead times as below:
10L - Minimum Order Quantity 180L - Ext. lead time 14-21 Working days
20L - Minimum Order Quantity 160L - Ext. lead time 14-21 Working days
Ensure first coat is fully dry before applying second coat*
*Drying times are dependent upon weather conditions and average temperature. Usually dry and re-coatable in approximately 2-4 hours. Drying will be retarded in conditions of high humidity.
Performance
CO² Permeability:
(µ) value =2.410.000
Air diffusion equivalent: R = 301 metres (at 125 micron dry film thickness)
Test Certificate No. 2775*
Moisture Vapour Permeability:
83.45 g/m2/24 hrs. So (m) = 0.533 (at 146 micron dry film thickness)
Test Certificate No.2759*
Accelerated Weathering:
16,000 hrs. (equivalent to 32-33 years external weathering)
Test certificate No. 4759*
Fire:
Class 1 to BS476: Part 7 (LPC Report TE80640)
BS 476: Part 6 - Index of Performance (I) = 5, Sub-index (l1) = 0.3 LPC Report TE80636
Designated Class 0 as defined in the Building Regulations E15 (I) (e)
Limitations
Do not apply when there is a risk of rain or frost
Do not apply when during excessively damp conditions
Do not apply when the temperature is below 5°C
Please refer to the Safety Data Sheet before use for detailed health and safety information
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
5807-898737
Data sheet
Manufacturer
Glixtone
For Use By
Consumer Use
Interior / Exterior Use
Exterior Use
For Use On
Concrete, Cement Render, Masonry, Metal
Application Method
Brush Roller Spray
Sheen
Smooth
Single, Two or Three Pack
Single
Product Certifications
Tested to BS476: Parts 6 and 7 and satisfies Class 0 requirements,
Pack Size
5L
Key Features
For use as a weather-resistant protective and decorative finish, Up to 30 Years Protection
Coverage
Dependent upon the porosity and texture of the substrate. Average 6m² per litre. (8m² per litre on smooth surfaces of average porosity)
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Glixtone AC1 High Performance Smooth Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for two coats and do not take into account any substrate deviations or wastage
Approved by the National Residential Landlords Association (NRLA), destroys mould or fungi, sterilising prepared surfaces prior to the application of Glixtone Fungi-Shield Paint. Ideal for any internal areas that are susceptible to mould or organic growth including: walls, ceilings, woodwork, bathrooms, shower rooms, kitchens, bedrooms and...