This product is temporarily unavailable; in the meantime, our technical team recommend Wethertex WB1 WeatherBLOCKER as a great alternative - use discount code SAVE10 at checkout to save 10%!
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Blackfriar Exterior Water Seal is a silicone-based water repellent that stops moisture and damp penetrating in to your exterior walls. Providing excellent water-proofing protection, it can be used on all properties and on most surfaces. Ideal for exposed and porous walls that are subject to poor weather conditions.
Blackfriar Exterior Water Seal is a silicone-based water repellent that stops moisture and damp penetrating in to your exterior walls. Providing excellent water-proofing protection, it can be used on all properties and on most surfaces. Ideal for exposed and porous walls that are subject to poor weather conditions.
Preparation
Ensure surface to be treated is clean, sound and firm, with any cracks filled. Do not use alkaline or acid detergents or cationic surfactants. Mould growth should be treated with Blackfriar Anti-Mould Solution and allowed to dry. It is advisable to wait 28 days before treating fresh masonry.
Application
Ensure the product is thoroughly shaken prior to use. Apply 1 coat liberally by brush, roller or low pressure spray until the surface is saturated. Apply from bottom of the wall and work upwards. It is normal for the product to run down the surface (up to 30 cm) - this will not be visible when it has dried. On very porous surfaces, a second coat is necessary as soon as the first coat has lost its glossy appearance.
Clean Up
Remove as much product from application equipment as possible before washing with white spirit. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.
Limitations
Do not use under cold (less than 5°C) conditions. Do not apply to wet or damp surfaces. Application onto damp surfaces will prevent full penetration into the surface. Not suitable for use on wood, metal or limestone.
Product Features
Exterior use.
Provides long lasting water-proof protection.
Silicone-based.
Ideal for exposed & porous walls.
Colourless.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
I have a porcelain tiled external balcony. It leaks probably via the grout. There may be hair line cracks in the grout or it might just be soaking through. What could I seal the whole balcony with without affecting the colour of the tiles. Is there a clear sealant I could use? It would need to withstand harsh weather.
Answer:
Unfortunately we do not have a clear sealant we can recommend for application to a tiled balcony floor, we could only offer a system which would overcoat the tiles with a Dark Grey colour such as the Bullet Roof Mono Top system.
Steve Muzyka on 2019-01-19 23:04:15
Question:
Can I paint this on a rendered wall of my bungalow.And then paint the wall after. I live near the coast. The bungalow is solid wall construction with no cavity.
This product is temporarily unavailable; in the meantime, our technical team recommend Glixtone Fungi-Shield Concentrated Sterilising Solution as a great alternative - use discount code SAVE10 at checkout to save 10%!
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
* All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
Adam on 2021-02-02 21:04:58
