Wethertex C10 Multi-Surface Fungicidal Wash is a ready to use, water based masonry wash for the removal of a broad range of bacterial, algal and fungal growth on masonry surfaces prior to painting. Developed using fast acting bioactive technology, the product is particularly effective against algae and mould growth and creates a clean surface,...
Wethertex ST1 Quick Dry Stabilising Primer
Wethertex ST1 Quick Dry Stabilising Primer is the ideal product for use when preparing unstable exterior surfaces for painting. Specially developed using fine particle sized polymers, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability.
- Seals and stabilises prior to painting - For powdery masonry surfaces
- Silicone water repellent - Water based
- High adhesion and quick drying - Breathable - Microporous
Wethertex ST1 Quick Dry Stabilising Primer is the ideal product for use when preparing unstable exterior surfaces for painting. Specially developed using fine particle sized polymers, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability. The quick drying nature of the product allows Wethertex masonry paints to be applied with minimum delay.
Features & Benefits
- Seals and stabilises prior to painting
- For powdery masonry surfaces
- Silicone water repellent
- Suitable for brush, roller or spray application
- High adhesion
- Water based
Remove all loose and flaking material from the substrate, including algae growth. This should be removed with Wethertex C10 Multi-Surface Fungicidal Wash. Also ensure all damaged areas in the substrate have been repaired with a suitable exterior filler.
Wethertex ST1 Quick Dry Stabilising Primer is applied neat with a roller, or brush in one generous coat.
- For Use By
- General Use
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- 2-4 Hours
- Fully Cured (at 20°C)
- 7-10 Days
- 5m² per litre
- Base Type
- Exterior / Interior Use
- Exterior Use
|MThompson on 2021-12-20 10:10:02|| |
Can this sealant Wethertex ST1 be used on outside walls now at this time of the year.
For application of this product the temperature must be between 5°C and 25°C for a minimum of 24 hours.
|Alan on 2021-08-12 08:49:42|| |
Can your quick dry stabilising primer, be used on new plywood (school porta cabin) prior to HBS flex hi-build coating
On plywood we recommend priming first with Wethertex ST1 Quick Dry Stabilising Primer and then using a plasterers scrim on the joints before applying the Wethertex HBS Flex-Coat Hi-Build Coating.
|Cheryl on 2021-05-09 21:59:21|| |
I want to paint my tiled door step what do you recommend I have used frenchic paint but it lifts and bubbles I’ve sealed first and after but it still lifts
|Mrs Mader on 2018-10-18 09:42:55|| |
Silicon is to my knowledge a product which does not breath, i.e. lets air through. How is it that you are saying your silicone primer is breatheable ? I don't understand this and would be glad of an explanation from you as specialist. Thank you Sincerely R. Mader ( Mrs )
Wethertex products using the Optilife Silicone Technology have been scientifically developed and rigorously tested to work up to 20 years and provide ultra waterproofing, highly breathable and self-cleaning properties.
Constant attack by water, frost and sun can seriously degrade buildings, ultimately causing them to fail. Even bricks can become damaged and delaminate. This can lead to damp problems, damage to the wall construction itself, and potentially extremely expensive remedial works. Wethertex exterior paints have been developed using advanced silicone technology to protect buildings against the damage caused by such inclement weather conditions.
Wethertex CP80 Clad-Seal Steel and Cladding Coating is a high performance, self priming, exterior quality satin paint for use on a variety of metal & plastic substrates. Developed using advanced Optilife Silicone Technology, it is quick drying, highly water resistant and offers excellent protection against rust for up to 12 years....
Wethertex HBS Flex-Coat Hi-Build Coating (15KG), a high quality, heavily textured, highly flexible masonry paint that is highly waterproof and will protect your building for up to 20 years. Anti-Crack - Highly Breathable - Silicone Technology Perfect for renovation of small cracks, badly weathered or uneven areas Ideal for uneven,...
Wethertex OT25 Wood-Flex Satin Opaque Timber Paint is a quick drying, high quality opaque satin finish for all exterior timber, including cladding, windows, doors and other joinery. Uses advanced Optilife silicone technology, providing long term colour stability for timber and total weather protection for up to 12 years. Good blocking...
Wethertex WeatherBLOCKER is the perfect one stop solution for protecting your building from the damaging effects of penetrating damp. Developed using nano-technology, this clear, waterproof coating penetrates deep into brick or stone to give up to 25 years protection against damp without affecting the appearance of the substrate. Ready to...
Wethertex PP77 All Weather Pliolite Masonry Paint is a premium smooth matt finish solvent borne coating formulated using Pliolite technology, it has excellent adhesion and can be applied in temperatures as low as -5°C allowing for all year round application. Suitable for use on bonded paint and coatings, render, brick, stone, rough-cast and...