Sikagard 706 Thixo
  • Sikagard 706 Thixo

Sikagard 706 Thixo

170734

Sikagard 706 Thixo is a one part reactive silane based impregnation cream. It is a solvent free product with ~ 80% content of active substance. Sikagard 706 Thixo complies with the highest requirements of EN 1504-2 for hydrophobic Impregnation (penetration depth class II & resistance to freeze and thaw salt stresses).

Colour
Size
£676.00
VAT excluded

£811.20 Tax incl.
Quantity

Description

Sikagard 706 Thixo is a one part reactive silane based impregnation cream. It is a solvent free product with ~ 80% content of active substance. Sikagard 706 Thixo complies with the highest requirements of EN 1504-2 for hydrophobic Impregnation (penetration depth class II & resistance to freeze and thaw salt stresses).

Uses

Sikagard 706 Thixo is used as water-repellent impregnation (hydrophobic treatment) for absorbent substrates such as concrete in civil engineering or building concrete structures subjected to heavy stress due to freeze and thaw cycles and de-icing salts, chloride attack in marine environment, etc…

  • Suitable for protection against ingress (Principle 1, method 1.1 of EN 1504-9)
  • Suitable for moisture control (Principle 2, method 2.1 of EN 1504-9)
  • Suitable for increasing the resistivity (Principle 8, method 8.1 of EN 1504-9)

Characteristics / Advantages

  • Non-sag (thixotropic) consistency, allowing wastage-free application of sufficient quantities and assuring deep penetration
  • Reduction of water absorption
  • Reduction of absorption of aggressive or deleterious agents dissolved in water (i.e. de-icing salts or chloride from marine environment)
  • No noticeable change of water vapour permeability
  • Not film forming
  • Ready for use
  • Long term efficiency, deep penetration
  • Increases the resistance of concrete to freeze and thaw cycles and de-icing salts
  • Resistant to sea water
  • Low VOC content

For more details please download the product data sheet from the 'DATASHEETS' tab above.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
170734

Data sheet

Typical Coverage (per coat)
200-300g/m² per coat
Touch Dry
5 Hours
Application
Brush, Roller, Spray
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Remmers Funcosil C40

Remmers Funcosil C40 is a hydrophobizing impregnation agent in cream form on a silane base used for deep hydrophobization of concrete and reinforced concrete in buildings. Also for old, carbonated concrete surfaces as well as lime and cement renders. Not suitable for use if there are adjacent, solvent sensitive components. Image already added...

Price £101.88
In stock

Hydron Nu-Cryl WRS Extra

A unique hydrophobic oil and water repellent treatment, and a terrific stone and masonry sealer that keeps your structure looking as good as new, thanks to its clear application. Perfect For use on GRC, marble, granite and terrazzo. Conforms to EN 1504-2. Advantages Outstanding resistance to UV and weathering Unaffected by freeze and thaw...

Price £112.86
In stock

Hydron Nu-Guard Mural Basecoat

Nu-Guard® Mural Basecoat provides a solid background colour prior to the application of the Nu-Guard Mural Paint - the water-based paint allowing designers to paint their design onto previously painted concrete and brick. Advantages Perfect basecoat the the Nu-Guard Mural Paint Extensive colour range Touch dry in 1-2 hours. Fully dry in...

Price £48.75
In stock

Remmers Primer SV

Remmers Primer SV Primer SV is a solvent based and alkali resistant agent with high penetration capacity and a strengthening and hydrophobizing effect. Used as a strengthening primer for sanding, mineral building material substrates and weathered fibrated cement sheets beneath Silicone Resin Paint LA, Silicone Resin Filler Paint LA, Concrete...

Price £45.90
In stock

Eagle Wet Primer

Eagle Wet Primer is a solvent-free resin with low viscosity, applying in a single layer to increase adherence of waterproofing systems - use with Desmopol membranes, even on concrete or mortar substrates with high residual moisture.

Price £475.20
In stock

Britannia Stabilising Masonry Solution

A Stabilising Solution that is ideal for friable or chalky masonry, such as on sandstone, to provide an excellent substrate suitable for decoration. Advantages Solvent-based internal and external use Clear in colour Up to 2 years shelf life

Price £36.09
In stock

Remmers Funcosil OFS

Remmers Funcosil OFS is an oil, grease, water and soil repelling, water based, protective impregnation used for treating mineral building materials in floor and wall areas, to clearly reduce their tendency to soil. The effective ingredient reacts in the building material in the presence of moisture, forming a water repelling, UV and weather...

Price £76.41
In stock

Keim Silan Primer

Also known as Keim Silangrund, Keim Silan Primer is a water repellent silane-based primer for use with Keim Mineral Paint Systems.  Top Advantages Water repellent Easy to apply Non-flammable when dry Does not seal the pores of the building material This product is available as POA. Click here to email us for more information

In stock

Remmers Hydro Deep Primer

Remmers Hydro Deep Primer is a water based, deep primer with strengthening and hydrophobizing properties used as a strengthening and water repelling primer for sanding, cementitious substrates such as P II and P III renders underneath Silicone Resin Filling Paint LA, Silicone Resin Paint LA, Concrete Acrylic and other synthetic resin bound coating systems.

Price £51.40
In stock

Hydron Nu-Guard Tack Primer

Nu-Guard® Tack Primer gives you the base coat on which to apply the Nu-Guard AG System to non-porous or existing coatings. Advantages Exceptional adhesion to non-porous surfaces. Primer coat for the Nu-Guard AG System. Touch Dry from 3-4 hours. Water soluble. 12-month Shelf life.

Price £97.50
In stock

Keim Fixativ

A silicate binding and fixing agent made from pure, liquid potassium silicate for use with Keim systems. Keim Fixativ reacts chemically with the surface, and is used as a binding agent for the Keim systems. Top Advantages Non-film forming High binding power Environmentally friendly Odourless Non-toxic This product is available as...

In stock

Sika Water Repel +

Sika Water Repel + is a high performance transparent water repellent specially formulated to provide a water repellent finish and prevent attack by water penetration on porous substrates such as brick, stone, masonary, plaster, plasterboard, pebbledash, rendering, porous tiling, grouting, flags and block paving. Penetrates deep into the treated area and...

Price £87.84
In stock

Eagle Primer PU1000

Eagle Primer PU-1000 increases bonding and adhesion of waterproof membranes (Desmopol) to porous surfaces such as cement, concrete and mortar. Single component polyurethane-based resin Can be used in combination with mineral particles (silica sand) on very uneven surfaces. Apply by brush, roller or airless spray

Price £123.12
In stock

Sika Water Seal

Sika Water Seal is a solvent based, waterproofing water seal for masonry, to protect structures against rain, damp and frost. On application, dependent upon the porosity of the material to be treated, it penetrates to a depth of 5mm, effectively repelling driving rain. Used to protect brick, stone, concrete and masonry against rainwater penetration.

Price £90.96
In stock

Keim Royalan Grob

Keim Royalan Grob is a highly-filled primary coat and filler for the Keim Royalan system which reacts chemically with the surface. Resists industrial pollution and extreme climatic conditions. Top Advantages Water vapour permeable Non-flammable Water repellent UV and weather resistant Resists mould and fungal growth This product is...

In stock

Remmers Impregnation Primer

Remmers Impregnation Primer is a reactive, oligomer siloxane solution for water repellent priming of mineral building materials subsequently coated with Remmers Silicone Resin Paint LA, Concrete Acrylic and other synthetic resin bound coating systems. The substrate to be primed may show a pH value of up to 14 without negatively influencing the...

Price £47.07
In stock