Wethertex WB1 WeatherBLOCKER

Wethertex WeatherBLOCKER is the perfect one stop solution for protecting your building from the damaging effects of penetrating damp. Developed using nano-technology, this clear, waterproof coating penetrates deep into brick or stone to give up to 25 years protection against damp without affecting the appearance of the substrate. Due to the deep penetration into the substrate, WeatherBLOCKER is resistant to UV degradation and will retain its performance for many years.

Features & Benefits

• 25 Years protection
• Protection against the damaging effects of penetrating damp
• Low maintenance
• Energy saving
• Waterproofing
• Nano technology
• Water repellent
• Ready to use

Preparation

All surfaces should be clean, reasonably dry and free from algae, lichen & other growths and grease. If there is evidence of organic growth, power wash to remove & apply Wethertex C10 Multi-Surface Fungicidal Wash in accordance with instructions. Wethertex WeatherBLOCKER can take up to 7 days until full effects can be visible.

Application

Wethertex WeatherBLOCKER is best applied to the mineral substrate by the airless technique, undiluted and in the desired thickness. Brushes or lambskin roller may be used for smaller areas. Up to 0.1 - 0.2 Ltrs/m² may be applied in one operation to vertical surfaces without loss of material. The exact amount depends on the absorbency of the substrate. Ensure that the substrate is fully saturated.