Remmers Color Flex (formerly Elastoflex Facade Paint) is a highly elastic, silicone resin reinforced facade coating with a film preservative for surfaces at risk of algae and fungi. Non-yellowing - Colour stable High crack-bridging capacity Can be used as an elastic intermediate and finishing coat Water vapour permeable - Weather...
Remmers Color Flex Fill (Elastoflex Filler Paint)
Remmers Color Flex Fill (formerly Elastoflex Filler Paint) is a highly elastic primer with good filling properties for the Color Flex Coating System. It is easy to apply and can be used for the most various requirement profiles in an elastic coating system.
- High crack-bridging and good filling properties
- Used for facades and concrete surfaces
- Load-bearing, adhering old coatings on a mineral or synthetic resin base
- Cement-bound, mineral renders (DIN V 18550) P II and P III with a compressive strength > 7 N/mm²
Remmers Color Flex Fill (formerly Elastoflex Filler Paint) is a highly elastic primer with good filling properties for the Color Flex Coating System. It is used as a highly elastic intermediate coating in the Color Flex System and is easy to apply and can be used for the most various requirement profiles in an elastic coating system. Color Flex Fill is distinguished by high crack-bridging and good filling properties.
Please note that this item has a lead time of 7-10 days.
Because of Color Flex Fill's properties, it can be used in combination with Funcosil BI and Color Flex to produce water repelling, carbon dioxide-tight, protective coatings when restoring concrete, not only on synthetic resin bound but also cementitious restoration systems in outdoor areas. It can also be used as a good filling primer on aerated concrete.
Load-bearing, tightly adhering old coatings on a cementitious or synthetic resin bound base can be coated over which, in many cases, saves expensive removal of old coatings. Color Flex Fill can be used as an elastic primer with or without reinforcement on cracked facade surfaces (crack group I and II in the relevant BFS Codes of Practice), cementitious renders (DIN 18 550) mortar group P II and P III (see WTA Code of Practice).
- For Use By
- Professional Use
- Suitable Substrates
- Brush, Roller
- Touch Dry (at 20°C)
- 24 hrs
- 0.30 - 1.00 l/m²
- Recommended Thinner/Cleaner
- Max. Application Temperature
- 30 °C
- Min. Application Temperature
- 5 °C
- 1.2 g/cm³
- 40 g/l VOC
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 24 Hours
- UN Number
- Standard Colours
- Base Type
- Exterior / Interior Use
- Exterior Use
- Product Range
- Color Flex
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Remmers Color Flex Fill (Elastoflex Filler Paint) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT