Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Remmers Funcosil OFS is an oil, grease, water and soil repelling, water based, protective impregnation used for treating mineral building materials in floor and wall areas, to clearly reduce their tendency to soil. The effective ingredient reacts in the building material in the presence of moisture, forming a water repelling, UV and weather resistant network.
Remmers Funcosil OFS is an oil, grease, water and soil repelling, environmentally correct, water based, protective impregnation used for treating mineral building materials (e.g. silicate bound natural stone such as OBERNKIRCHENER SANDSTEIN®) in floor and wall areas, to clearly reduce their tendency to soil (through oil, grease, dirt, etc.).
Please observe: The suitability of this agent must be checked first on marble and other acid-sensitive, poorly absorbent types of stone with polished surfaces as well as on all types of fine stoneware (uniform wetting, absorbency, change in gloss, etc.). This is also advisable for surfaces that were treated earlier with other products.
Remmers Funcosil OFS is a water based, environmentally correct impregnation agent that makes surfaces easier to maintain. After drying the surface repels oils, grease, dirt and water. The effective ingredient reacts in the building material in the presence of moisture, forming a water repelling, UV and weather resistant network: After application, the active ingredient is deposited on the walls of capillaries and pores in the form of a macro-molecular layer which does not noticeably influence water vapour diffusion capacity.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Remmers Funcosil MCI is a one component water based corrosion inhibiting impregnation for preventative maintenance of all reinforced concrete buildings & structures. Used for civil engineering structures including bridges, piers, car parks, cooling towers & marine concrete structures. Image already added
Remmers Funcosil SL is effective over a wide range, especially as an impregnation agent for natural stone and lime based natural stone in particular. Because of its low molecular structure in the packaged state, it has very good penetration capacity and reacts chemically in the building material in the presence of humidity. Image already...
Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....
A unique hydrophobic oil and water repellent treatment, and a terrific stone and masonry sealer that keeps your structure looking as good as new, thanks to its clear application. Perfect For use on GRC, marble, granite and terrazzo. Conforms to EN 1504-2. Advantages Outstanding resistance to UV and weathering Unaffected by freeze and thaw...
Remmers Color PA Fill (formerly OS Concre-Fill) is a quartzite filled, fibre reinforced, intermediate coating applied by brush or spray that is used to close pores and pipes on concrete surfaces as well for filling missing and broken out areas up to 1mm deep. Concrete surfaces as well as existing coatings can be directly coated. Image...
Remmers Funcosil SNL is a hydrophobizing impregnation agent for porous, mineral building materials such as fair-faced brick masonry work, sand-lime brick, mineral renders, aerated concrete and light-weight concrete.
Sika Water Seal is a solvent based, waterproofing water seal for masonry, to protect structures against rain, damp and frost. On application, dependent upon the porosity of the material to be treated, it penetrates to a depth of 5mm, effectively repelling driving rain. Used to protect brick, stone, concrete and masonry against rainwater...
Nu-Cryl WRS is a clear masonry sealer with a unique coating system providing oil, stain and water repellency. Producing a non-glossy appearance, it will not affect the colour of the substrate. Conforms to EN 1504-2. Advantages Outstanding resistance to weathering and UV Unaffected by freeze and thaw cycles Clear/Invisible finish Stain resistant...
Remmers Quartz Primer is a bonding layer for cementitious substrates with low absorption behaviour. Remmers Quartz Primer is suitable for all cementitious substrates that have low absorption capacity because of low porosity. With Remmers Quartz Primer, a bonding layer is produced between the "render-unfriendly" substrate and the render to be...
Also known as Keim Silangrund, Keim Silan Primer is a water repellent silane-based primer for use with Keim Mineral Paint Systems. Top Advantages Water repellent Easy to apply Non-flammable when dry Does not seal the pores of the building material This product is available as POA. Click here to email us for more information
Eagle Primer PU-1000 increases bonding and adhesion of waterproof membranes (Desmopol) to porous surfaces such as cement, concrete and mortar. Single component polyurethane-based resin Can be used in combination with mineral particles (silica sand) on very uneven surfaces. Apply by brush, roller or airless spray
Remmers Primer Hydro S F (formerly Silicate Strengthener) is an alkaline, cementitious strengthener, this product forms a silicate gel. It strengthens the surface and the structure (capillary pores and fine cracks) of old masonry work but is not water repelling. It does not produce a hydrophobic effect. It reacts immediately with cement or...
Nu-Guard® NRG Colour Primer is the perfect basecoat for the Nu-Guard NRG Topcoat; an energy-saving coating with resistance against the elements. Once this basecoat is applied, lay on the topcoat, choosing from our selection of RAL colours. Advantages Forms perfect basecoat. Improves energy efficiency. Exterior and interior use. Resistance to...
Remmers Primer H (formerly Impregnation Primer) is a reactive, oligomer siloxane solution for water repellent priming of mineral building materials subsequently coated with Remmers Silicone Resin Paint LA, Concrete Acrylic and other synthetic resin bound coating systems. The substrate to be primed may show a pH value of up to 14 without...
Remmers Funcosil FC is especially used for hydrophobizing impregnation of porous, mineral building materials. It is a special product for hydrophobizing impregnation of brick, clinker, sand-lime brick, silicate types of natural stone and mineral render. As opposed to conventional liquid products, Funcosil FC can be applied in just one working...
Keim Soldalit Fixativ is sol-silicate binding agent and dilution for use with the Keim Soldalit system. Top Advantages Acts as a primer for highly absorbent substrates Weather resistant and UV resistant Non-flammable No solvents and plasticisers added This product is available as POA. Click here to email us for more information
