Remmers Color LA Fill (Silicone Resin Filling Paint)
Remmers Color LA Fill (formerly Silicone Resin Filling Paint LA) is a fibre reinforced silicone resin paint with quartzite fillers and crack filling properties.
- Can be used as a primer and filling intermediate coat for levelling differing roughness on the surface.
- Suitable for water repelling, highly water vapour permeable and protective coatings on mineral building materials.
- Matt, mineral character
- Fine-sand, coarse texture
Remmers Color LA Fill (formerly Silicone Resin Filling Paint LA) is a fibre reinforced silicone resin paint with quartzite fillers and crack filling properties. Because of its characteristic properties, Remmers Color LA Fill is suitable for water repelling, highly water vapour permeable, protective coatings on mineral building materials, especially when used in combination with Impregnation Primer.
It can be used as a primer on load-bearing silicate and silicone paints as well as matt dispersion paints. It is also suitable as a filling, intermediate coat for levelling differing roughness on the surface of render (so called render pockets). Please observe: VOB [German Contract Procedure in the Building Industry], part C, DIN 18363, paragraph 2 and 3, as well as BFS [German Federal Committee for Paint and the Protection of Material Assets] Codes of Practice for the respective work areas.
This product is not suitable for working over plastic, thermoplastic and elastic coating systems. These systems must be completely removed first.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Water Based
- Interior/Exterior Use
- Brush, Roller
- 0.3 - 0.5kg per m²
- Recommended Thinner/Cleaner
- Max. Application Temperature
- 25 °C
- Min. Application Temperature
- 5 °C
- 1.50 g/cm³
- Shelf Life (from date of manufacture)
- 12 months
- UN Number
Be the first to ask a question about this product!