Remmers Silicone Resin Filling Paint LA

0560

Remmers Silicone Resin Filling Paint LA is a fibre reinforced silicone resin paint with quartzite fillers and crack filling properties. It can be used as a primer and filling intermediate coat for levelling differing roughness on the surface. Suitable for water repelling, highly water vapour permeable and protective coatings on mineral building materials.

Colour
Size
Finish
£163.44
VAT excluded

£196.13 Tax incl.
Quantity

Description

Remmers Silicone Resin Filling Paint LA is a fibre reinforced silicone resin paint with quartzite fillers and crack filling properties. Because of its characteristic properties, Remmers Silicone Resin Filling Paint LA is suitable for water repelling, highly water vapour permeable, protective coatings on mineral building materials, especially when used in combination with Impregnation Primer.

It can be used as a primer on load-bearing silicate and silicone paints as well as matt dispersion paints. It is also suitable as a filling, intermediate coat for levelling differing roughness on the surface of render (so called render pockets). Please observe: VOB [German Contract Procedure in the Building Industry], part C, DIN 18363, paragraph 2 and 3, as well as BFS [German Federal Committee for Paint and the Protection of Material Assets] Codes of Practice for the respective work areas.

This product is not suitable for working over plastic, thermoplastic and elastic coating systems. These systems must be completely removed first.

This product is subject is to a 7-10 day lead time.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
0560

Data sheet

Application
Brush, Roller
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Keim Contact Plus

Keim Contact Plus is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints. Top Advantages Equalises textures Resistant to UV Non-flammable Breathable finish This product is available as POA. Click here to email us for more information

In stock

Remmers Funcosil SNL

Remmers Funcosil SNL is a hydrophobizing impregnation agent for porous, mineral building materials such as fair-faced brick masonry work, sand-lime brick, mineral renders, aerated concrete and light-weight concrete.

Price £59.40
In stock

Remmers Silicate Strengthener

Remmers Silicate Strengthener as an alkaline, cementitious strengthener, this product forms a silicate gel. It strengthens the surface and the structure (capillary pores and fine cracks) of old masonry work but is not water repelling. It does not produce a hydrophobic effect. It reacts immediately with cement or cement mixtures as a rapid binder. Image...

Price £39.60
In stock

Remmers Funcosil C40

Remmers Funcosil C40 is a hydrophobizing impregnation agent in cream form on a silane base used for deep hydrophobization of concrete and reinforced concrete in buildings. Also for old, carbonated concrete surfaces as well as lime and cement renders. Not suitable for use if there are adjacent, solvent sensitive components. Image already added...

Price £101.88
In stock

PPG NovaGuard 4701

PPG NovaGuard 4701 is a two-part glass flake vinylester primer for concrete and steel as a holding primer for Novaguard 4801. Suitable for service temperature >80°C (176°F) when overcoated with NOVAGUARD 4801 dependent on the actual environment. Mixing ratio by volume: base to catalyst 98:2

Price £405.60
In stock

Eagle Primer PU1000

Eagle Primer PU-1000 increases bonding and adhesion of waterproof membranes (Desmopol) to porous surfaces such as cement, concrete and mortar. Single component polyurethane-based resin Can be used in combination with mineral particles (silica sand) on very uneven surfaces. Apply by brush, roller or airless spray

Price £123.12
In stock

Wethertex ST1 Quick Dry Stabilising Primer

Wethertex ST1 Quick Dry Stabilising Primer is the ideal product for use when preparing unstable exterior surfaces for painting. Specially developed using fine particle sized polymers, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability. Quick drying,...

Price £20.25
In stock

Hydron Mona-Guard Plus

Paint this picture: a new library has been built. A beautiful coloured brick has been chosen and it's your job to protect the brickwork from the elements but you must not change the colour of the brick. The Mona-Guard Plus is the coating you are looking for. Conforms to EN 1504-2 for added peace of mind. Reduces Penetration of oil/water. Organic...

Price £58.60
In stock

Hydron Mona-Guard Extra

Conforming to EN 1504-2, the Mona-Guard Extra Natural Stone Sealer is an excellent sealer for environments which are subject to high traffic or public spaces, where resistance to oil, water, weathering and UV are important. Other Key Benefits Reduce costs: only one coat is required. Many applications: use on dense, low porous substrates....

Price £69.25
In stock

Carboline Carbomastic 615 AL

An aluminium-filled epoxy for steel and concrete that has excellent resistance to water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Top Features Aluminium flakes provide exceptional barrier...

Price £249.75
In stock

Remmers Quartz Primer

Remmers Quartz Primer is a bonding layer for cementitious substrates with low absorption behaviour. Remmers Quartz Primer is suitable for all cementitious substrates that have low absorption capacity because of low porosity. With Remmers Quartz Primer, a bonding layer is produced between the "render-unfriendly" substrate and the render to be applied....

Price £34.90
In stock

Keim I & F Grund (I.G. Primer)

Keim I. G. Primer is a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining. Top Features High water vapour permeability Resistance to yellowing Water repellent This product is available as POA. Click here to email us for more information

In stock

Carboline Carboguard 888 MIO

A low temperature and rapid curing primer/finish with an extended recoat window that provides excellent corrosion resistance as a primer, intermediate or finish coat on to steel. Top Features Low-temperature characteristics Rapid handling Low yellowing VOC compliant

Price £249.00
In stock

Remmers Funcosil MCI

Remmers Funcosil MCI is a one component water based corrosion inhibiting impregnation for preventative maintenance of all reinforced concrete buildings & structures. Used for civil engineering structures including bridges, piers, car parks, cooling towers & marine concrete structures.  Image already added

Price £42.40
In stock

Hydron Mona-Guard Dustproofer

Concrete naturally dusts and powders. If you need a dust-free environment, for example in a cafe, you don't want your customers getting concrete dust all over their clothes. The Mona-Guard Dustproofer is the ideal way to prevent dusting, while also hardening at the same time, giving a nice smooth finish. Other Advantages Long-lasting. Reduces oil...

Price £32.73
In stock

Remmers Funcosil FC

Remmers Funcosil FC is especially used for hydrophobizing impregnation of porous, mineral building materials. It is a special product for hydrophobizing impregnation of brick, clinker, sand-lime brick, silicate types of natural stone and mineral render. As opposed to conventional liquid products, Funcosil FC can be applied in just one working...

Price £154.98
In stock