- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Keim Contact Plus
Keim Contact Plus is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.
- Equalises textures - Resistant to UV - Non-flammable - Breathable finish
Keim Contact Plus is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints. Keim Contact Plus contains glass fibres and silicate minerals in consistent grain sizes and shapes.
Top Features & Benefits
Keim Contact Plus is an excellent coating designed to fill-up cracks up 0.5mm in width. It also boasts these additional useful features:
- Equalises textures.
- Resistant to UV.
- Breathable finish.
Preparation & Application
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.
Dilute Keim Contact Plus with the appropriate system dilution at 1 lt per 10 kg. Apply uniformly with brush or roller. Application conditions Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Clean tools with water immediately after use.
- For Use By
- General Use
- Base Type
- Exterior / Interior Use
- Exterior Use
Be the first to ask a question about this product!