Keim Soldalit Grob


Keim Soldalit Grob is a primary coat and filler for the Keim Soldalit system. Can be used to bridge hairline cracks and equalise the surface.

  • Equalises differences in texture
  • Multipurpose application
  • Alkaline
  • Non-flammable
  • Water vapour permeable, microporous
  • No solvents and plasticisers added

£91.00(ex. VAT)
£109.20 (inc. VAT)
Please choose your colour
Available for Delivery (See Delivery Options Below)


Keim Soldalit Grob is a primary coat and filler for the Keim Soldalit system. Can be used to bridge hairline cracks and equalise the surface.

Top Features & Benefits

Keim Soldalit Grob is a non-film forming basecoat that fills hairline cracks and boats the following additional features:

  • Equalises differences in texture.
  • Multipurpose application.
  • Alkaline.
  • Non-flammable.
  • Water vapour permeable, microporous.
  • No solvents and plasticisers added.

Preparation & Application

Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application using KEIM Soldalit Grob may proceed. KEIM Contact Plus can be used instead of KEIM Soldalit Grob as a base coat for large cracks over 1mm in width or where there is a need to equalise the surface.

In most instances KEIM Soldalit Grob should be applied undiluted and can be applied by brush, roller, or, spray. After a minimum waiting period of at least 12 hours KEIM Soldalit in the chosen colour may be applied.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

Clean tools with water immediately after use.

Product Details

Data sheet

For Use By
General Use
Brush, Roller, Airless Spray
Approx. 0.25kg/m2 Keim Soldalit Grob.
Base Type
Exterior / Interior Use
Exterior Use

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

questions Robert Snellgrove on 2019-11-05 15:04:54

What is the maximum width of crack that this product will bridge?

Answer from Rawlins’ Technical Team: 

Keim Soldalit Grob can bridge approximately 0.5mm. There is also Keim Contact Plus Grob which will bridge up to 1mm.

Question about the product

* Required fields