Keim I & F Grund (I.G. Primer)
  • Keim I & F Grund (I.G. Primer)

Keim I & F Grund (I.G. Primer)

KEI1019

Keim I & F Grund (I.G. Primer) is a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining.

  • High water vapour permeability.
  • Resistance to yellowing.
  • Water repellent.
  • Consolidating.
  • Highly water vapour permeable: two-coat application: sd = 0.04m.
  • Density: 0.9g/cm3.

This product is available as POA. Click here to email us for more information

Colour
Size
Quantity

Description

Keim I. G. Primer is a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining. Used as a primer particularly for substrates that are contaminated with soot, nicotine and tar and to consolidate substrates.



Top Features & Benefits


  • High water vapour permeability.
  • Resistance to yellowing.
  • Water repellent.
  • Consolidating.
  • Highly water vapour permeable: two-coat application: sd = 0.04m.
  • Density: 0.9g/cm3.



Preparation & Application


Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim I. G. Primer may proceed.

Application
It is usually sufficient to apply only one coat of Keim I. G. Primer. For extremely strong contamination a second coat is recommended with 4 hours between coats. Keim I. G. Primer is supplied ready to use and should be applied undiluted by brush or roller.

Keim I. G. Primer can be used between coats of Keim Mineral Paint systems. After a waiting time of approx. 5 hours Keim I. G. Primer be over coated with any of the Keim Mineral Paint systems.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.

Consumption
Approx. 0.1lt/m² per coat. Consumption rates are offered for guideline purposes only and are quoted for smooth rendered surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.

Cleaning of Tools
Clean tools with cellulose thinner (or similar) immediately after use.

Product Details
KEI1019
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send