Keim Fixativ is a silicate binding and fixing agent made from pure, liquid potassium silicate for use with Keim systems. Keim Fixativ reacts chemically with the surface, and is used as a binding agent for the Keim systems.
- Non-film forming
- High binding power
- Environmentally friendly
**Available for delivery - see Delivery Options below**
Keim Fixativ is a silicate binding and fixing agent made from pure, liquid potassium silicate for use with Keim systems. Reacts chemically with the surface, and is used as a binding agent for the Keim systems. Diluted Keim Fixativ can be used to control or reduce the absorbency of highly absorbent mineral substrates.
Keim Fixativ bonds permanently with the substrate by silicification, is highly water vapour permeable, extremely resistant to weathering and absolutely incombustible and contains no organic additives.
Top Features & Benefits
- Non-film forming.
- High binding power.
- Fixing action, consolidates the surface.
- Absolutely UV and weather resistant.
- Resistant to industrial fumes and solvents.
- Environmentally friendly.
- Resistant to mould and fungal growth.
- Low environmental impact building material.
- Density: Q – 1.17g/cm.
- Flash Point non flammable.
- pH-value: approx. 11.3.
Preparation & Application
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, treatment using KEIM Fixativ may proceed.
Single coat application of KEIM Fixativ, diluted 50:50 with clean cold water and applied by brush, worked well in to the surface.
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
0.1lt/m² of KEIM Fixativ (and 0.1lt/m² of water).
Consumption rates are offered for guideline purposes only and are quoted for smooth rendered surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Cleaning of Tools
Clean tools with water immediately after.
- For Use By
- General Use
- Base Type
- Exterior / Interior Use
- Exterior Use
|vlad on 2019-12-13 09:58:58|| |
do you know if this product will react with cooper
Keim Fixativ will not work on copper.