A ready mixed, flexible, through coloured penetrating primer in 20 exclusive colours prior to the application of MP44 Spray Wall Coating or AX1 Pliolite Thin Coat Render.
Wethertex PP1 Pre-Prep Wash Coat Primer is a ready mixed, flexible, through coloured penetrating primer to control suction and ensure good key, prior to the application of MP44 Spray Wall Coating or AX1 Pliolite Thin Coat Render.
Suitable substrates include GRC, X71, Bonded Paint, Dash, Roughcast and Render.
All surfaces must be sound, clean, dry and free of any material which may impair adhesion. Scaffolding must be independently-tied to allow for uninterrupted application. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified.
PP1 Pre-prep Primer is supplied ready to use, but may need re-mixing using a suitable paddle mixer to regain correct consistency for application.
By roller – submerge the roller totally in the primer to ensure that the roller is fully loaded with material to allow even application without spreading too thinly.
Specification Clauses relating to this product can be found in NBS Section M20 Rendering. BS 5262 Code of Practice for External Rendering and BS 8000-10 must be followed.
When stored unopened in a dry place at temperatures above 5ºC, shelf life is 12 months from the date of manufacture.
All equipment must be washed with clean white spirit immediately after use. Waste material should not be emptied in the drainage systems.
The weather conditions for application and drying are critical. Do not apply if any of the following conditions are likely to arise during - or in the first 24 hours following application:
The product must be protected against heavy rain, direct sun or wind in the first 24 hours after application. Sheeting the façade or the scaffold is advised to protect against this. For this particular product if these parameters are not met polymer film damage, wash off, discolouration and potential failure can occur. It is the responsibility of the application contractor to manage and record the weather conditions during application and curing of the product.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Wethertex PP1 Pre-Prep Wash Coat Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below. More Information Delivery Info Wethertex 2021 Brochure
£15.94 (incl. VAT)
£13.28 (ex. VAT)
