Coo-Var Brick & Tile Paint SB is an alkyd based versatile gloss red finish. It is ideal for use on porches, front walls, out buildings, most brickwork, masonry or stone.
A water based matt version is available here: Coo-Var Brick & Tile Paint WB
Surface Preparation
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting.Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
Application Conditions
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.
Preceding Coat
Apply Direct to stable surfaces (see Surface Prep section).
Subsequent Coat
Coo-Var Brick and Tile Paint Gloss Red.
Recommended Uses
- Porches
- Front walls
- Outbuildings
- Garden walls
- Brickwork
- Masonry
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
