Remmers Color PA (formerly Concrete Acrylic), particularly when combined with Remmers Primer H, meets the requirements for use as a CO2 inhibiting and water repelling protective coating for renovation and repair measures on concrete surfaces.
Weather resistant
Very good hiding power
Colour stable
Easy to apply
Available in 280+ RAL colours
Image already added
Product customisation
Don't forget to save your customization to be able to add to cart
Remmers Color PA (formerly Concrete Acrylic), particularly when combined with Remmers Primer H, meets the requirements for use as a CO2 inhibiting and water repelling protective coating for renovation and repair measures on concrete surfaces. Cement-bound render surfaces and fibrated cement boards can also be coated with Concrete Acrylic.
Because of its high standard of development, Remmers Color PA is distinguished by a wide range of properties. In spite of its high CO2 diffusion resistance, Color PA coatings have good water vapour diffusion values. It protects the substrate in an optimal way against rain. The coating is driving rain and splash water tight.
The material is also non-yellowing, extremely weather resistant and completely saponification stable. The material is easy to apply. Thanks to its high quality, small, static hair cracks in the substrate are bridged with two coats. Remmers Color PA also has very good hiding power.
Image already added
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Remmers Primer H (formerly Impregnation Primer) is a primer with hydrophobic effect for water repellent priming of mineral building materials subsequently coated with Remmers Color LA, Remmers Color PA and other synthetic resin bound coating systems.
Equalises absorption capacity
Alkali-resistant
Contains solvents
High penetration...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.