Britannia Wallshield Pliolite

WALLP

Britannia Wallshield Pliolite offers all-year protection, and is available in a range of aesthetically-pleasing colours which can be easily applied to many types of building substrates, even in cold temperatures (down to -5°C).

  • Solvent-based for exterior walls
  • Up to 15 years protection
  • Allows all year around exterior decoration
  • Showerproof in 20 minutes
  • Water-repellent
  • 2 years shelf life

**Available for delivery - see Delivery Options below**

Colour
  • Current colour: White
Choose a colour
Close colour picker
  • White
  • Ivory White
  • Britannia Eggshell
  • Rustic Beige
  • Pearl Grey
  • Cream
  • Autumn Red
  • Rich Brown
  • Mild Rose
  • Champagne
  • Light Grey
  • Oak Grey
Size
£35.91
VAT excluded

£43.09 Tax incl.
Quantity

Description

Britannia Wallshield Pliolite is a solvent-based coating offering all year round exterior decoration which provides up to 15 years protection.

The smooth and long lasting matt finish can be applied down to -5°C, and is showerproof in approximately 20 minutes after application.

Suitable for the decoration of external substrates including concrete, cement rendering, brick, stone, blockwork and pebbledash. Also suitably primed aluminium, iron work and surfaces previously painted with emulsion or oil paints.

Do not apply if there is a risk of heavy rain.

Do not use on bitumen coatings.

Not be used on high density, low suction substrates such as glazed bricks, faience tiles and engineering bricks.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Solvent-based
  • All year round exterior decoration
  • 15 years protection
  • Can be applied down to -5°C
  • Becomes showerproof in 20 mins
  • Can be brush, roller or spray applied
  • One-pack
  • Suitable for the decoration of external substrates including concrete, cement rendering, brick, stone, blockwork and pebbledash.
  • Also for suitably primed aluminium, iron work and surfaces previously painted with emulsion or oil paints.



Spreading Rate


These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • As a general guide 6-8 square metres/litre per coat.



Drying Times


  • Touch Dry: 1 - 1.5 hour*
  • Recoatable after 16-24 hours* under normal drying conditions

*Drying time will vary according to temperature and humidity e.g. the drying time quoted will be significantly longer in cold, damp conditions.



Preparation


New Surfaces:

  • All surfaces must be sound, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
  • Surfaces with suction (Porous surfaces) should be treated with an application of Britannia’s Stabilising Masonry Solution (see separate technical data sheet).

Previously Decorated Surfaces:

  • All surfaces must be sound, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
  • Remove all loose, and failing or suspect material by scraping or brushing with a stiff bristle brush (not wire) to a sound edge.
  • Organic growth must be removed and the areas treated with Britannias Fungicidal Wash Solution. For surfaces in poor condition mechanical means may be necessary e.g. pressure washing between 1500-2000psi (102-136 bar), proprietary paint removal system, wet or dry grit blasting. Care must be taken not to damage the underlying surface.
  • Fill cracks and small defects in masonry surface with a proprietary ready mixed Filler and finish to match existing.
  • Stabilise all bare, filled and previously decorated chalking areas with the application of Britannia’s Stabilising Masonry Solution.
  • Wash any soundly adhering gloss painted surfaces with hot water and liquid detergent solution to remove any contaminants frequently changing the water. Wet abrade to provide a key. Rinse thoroughly with clean water to remove all residues.



Application


  • Supplied ready for use.
  • Please follow the coverage rates shown in Spreading Rate Section.
  • Stir well before using
  • Do not thin*.

*Except when extremely cold when up to 10% white spirit can be added for brush or spray application.

  • Apply by brush, medium or long pile roller depending on surface texture or by airless spray.
  • For airless spray use a minimum fluid pressure of 2000psi (136 bar) and a minimum tip size of 0.018 thou.
  • Mask as necessary with a wet strength grade masking paper.
  • Remove as much product as possible from application equipment before cleaning.
  • Replace lid firmly.



Cleaning


  • Clean equipment immediately after use with white spirit.



Shelf Life & Storage


  • Up to 2 Years if stored correctly and unopened under normal and frost free conditions.



Precautions


  • Flammable keep away from sources of ignition.
  • Ensure good ventilation during application.
  • Wear gloves, goggles and suitable protective clothes.
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice.
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water.
  • Keep out of reach of children.
  • Do not use near fishponds.
  • Toxic to aquatic organisms. May cause long term adverse effects in the aquatic environments.
  • Do not empty into drains.



Product Details
WALLP

Data sheet

Application
Brush, Roller, Spray
Coverage
As a general guide 6-8 square metres/litre per coat. Apply 2 Coats
Touch Dry
Touch Dry: 1-1.5 hour. Recoatable after 16-24 hours under normal drying conditions.
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Britannia Stabilising Masonry Solution

Britannia Stabilising Masonry Solution is a solvent-based stabilising solution for friable and chalking surfaces. Internal and external use Highly penetrating Pliolite resin-based acrylic solution Produces a surface suitable for decoration Surface dry in 1-2 hours Coverage Calculator More Information **Available for delivery - see...

Price £36.09
In stock