Wethertex PP77 All Weather Pliolite Masonry Paint - Smooth Matt is a premium, solvent borne coating that is brush, roller or spray applied. Formulated using Pliolite technology, it has excellent adhesion and can be applied in temperatures as low as -5°C allowing for all year round application and offers protection for up to 15 years.
It is suitable for use on bonded paint and coatings, render, brick, stone, rough-cast and other masonry substrates.
All surfaces must be clean, dry and free from algae, lichen & other growths
If there is evidence of organic growth, power wash to remove and apply Wethertex C10 Fungicidal Wash in accordance with manufacturer’s instructions
Any faults in the substrate, particularly those that can lead to moisture penetration, must be rectified or the affect the finish quality may be affected
Any existing crazed or flaking paint, dirt, grease or other surface contaminants should be removed
Application
Stir the product thoroughly, do not contaminate
PP77 All Weather Pliolite Masonry Paint can be applied down to -5ºC by brush, short pile roller or spray
After suitable preparation, apply two coats
Product may be thinned by no more than 10% for use as a penetrating base coat on very porous surfaces
Do not thin for normal application (Use clean White Spirit)
Storage
When stored unopened in a dry place at temperatures above 5ºC, shelf life is 12 months from the date of manufacture
If you have any left over product, ensure that you close the tin by replacing the lid firmly and securely and store in a safe place
To avoid the risk of spillage, always store and transport in a secure upright position
Tool Cleaning
All equipment must be washed with clean, white spirit after use
Waste material should not be emptied in the drainage system
Some local authorities have special facilities for the disposal of leftover paint
Please do not add any product into drains or watercourses
Product Details
3178-934836
Data sheet
Manufacturer
Wethertex
Interior / Exterior Use
Exterior Use
For Use On
Render Brick Stone Masonry Walls
Application Method
Brush Roller Spray
Sheen
Matt
Single, Two or Three Pack
Single
Pack Size
10L
Touch Dry (at 20°C)
1-2 Hours
Dry to Recoat (at 20°C)
16-24 Hours
Fully Cured (at 20°C)
7-10 Days
Coverage
4-15m² per litre
Min. Application Temperature
(-5°C)
UN Number
UN1263
Colour(s)
Fully Tintable
Base Type
Solvent-Based
Suitable For Use On
Masonry Walls
Suitable For Use On
Brick
Suitable For Use On
Render
Suitable For Use On
Stone
Finish
Matt
Application Method
Brush
Application Method
Spray
Application Method
Roller
Manufacturer
Wethertex
Usages
Water Resistant Coat
Product Usage Type
Topcoat
Product Range
Pliolite
Fastest Delivery
Next Working Day
Colour Family
Magnolia
Colour Family
Brown
Colour Family
Neutral
Colour Family
Orange
Colour Family
Beige
Colour Family
Yellow
Colour Family
Green
Colour Family
Black
Colour Family
Red
Colour Family
White
Colour Family
Pink
Colour Family
Chartwell Green
Colour Family
Violet
Colour Family
Purple
Colour Family
Grey
Colour Family
Off-White
Colour Family
Blue
Categorised As
Masonry Paints > Low Temperature Smooth Masonry Paints
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
How long should you wait before applying the second coat?
Answer from Rawlins’ Technical Team:
3 to 4 hours is recommended between coats.
CMS on 2022-09-27 15:10:06
Question:
what is the coverage on brick and do you need a base coat
Answer from Rawlins’ Technical Team:
Assuming the brickwork is porous, bare, clean, dry sound and prepared as detailed in the technical data sheet we would recommmend two coats are applied with the first coat thinned no more that 10% with Bartoline White Spirit followed by an undiluted second coat.
Regarding coverage, you can expect approximately 4 to 8m² per litre for the first coat and 10 to 15m² per litre of the second coat.
John on 2022-08-09 20:55:46
Question:
Is weathertex pp77 suitable for use on lime render
Answer from Rawlins’ Technical Team:
Unfortunately no this is not suitable for application to lime render.
This is available in many RAL, NCS or BS colours in a matt finish.
Mel on 2022-06-06 15:44:18
Question:
I’m having my house re rendered in standard sand & cement. 1 How long should I wait until painting it ? 2 Will the bare surface require any additional treatment before painting? Thanks
Answer from Rawlins’ Technical Team:
The render must be fully cured, clean, dry, sound and prepared as detailed in the technical data sheet prior to application.
The render used and thickness applied will dictate the time this would take.
Wethertex PP77 All Weather Pliolite Masonry Paint - Smooth Matt is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
Ready to use water based masonry wash for removal of bacterial, algal and fungal growth on masonry surfaces prior to painting. Particularly effective against algae and mould growth and creates a clean surface, ready for painting.Long term protection - Fast acting - Bio Stop Suitable for hand or spray application - For use on masonry or...
Wethertex CP80 Clad-Seal Steel and Cladding Coating is a high performance, self priming, exterior quality satin paint for use on a variety of metal substrates. Developed using advanced Optilife Silicone Technology, it is quick drying, highly water resistant and offers excellent protection against rust for up to 12 years.Available in 4,350+...
High quality, heavily textured, highly flexible masonry paint with 1,600+ colours that is highly waterproof and will protect your building for up to 20 years.Anti-Crack - Highly Breathable - Silicone Technology Perfect for renovation of small cracks, badly weathered or uneven areas Ideal for uneven, weathered substrates Available in...
Wethertex OT25 Wood-Flex Satin Opaque Timber Paint is a quick drying, high quality opaque satin finish for all exterior timber, including cladding, windows, doors and other joinery. Uses advanced Optilife silicone technology, providing long term colour stability for timber and total weather protection for up to 12 years.Good blocking...
The ideal product for use when preparing unstable exterior surfaces for painting. Specially developed using fine particle sized polymers, this silicone based product is able to penetrate deep into the substrate, creating ultra high adhesion and high vapour permeability.Seals and stabilises prior to painting - For powdery masonry surfaces...
The perfect one stop solution for protecting your building from the damaging effects of penetrating damp. Up to 25 years protection against damp in brick or stone without affecting the appearance of the substrate. Developed using nano-technology, penetrates deep into surfaces.Ready to use - Suitable for spray application Highly resistant...
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below. More Information Delivery Info Wethertex 2021 Brochure