Keim Soldalit

KEI1027

Keim Soldalit is a highly specialised mineral paint system based on a binding agent combination of silica sol and potassium silicate, for use on exterior surfaces.

  • Highly water repellent
  • Water vapour permeable, microporous
  • UV and acid resistant, anti-static
  • High weathering resistance
  • Non-flammable
  • No solvents and plasticisers added
  • Resists algal and fungal growth

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£84.00
£100.80 Incl. VAT
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

Keim Soldalit is a highly specialised mineral paint system based on a binding agent combination of silica sol and potassium silicate, for use on exterior surfaces. This combination allows the application of mineral coatings not only on mineral, but also on a variety of previously painted surfaces directly without the use of any stabilising agents.



Top Features & Benefits


Keim Soldalit's alkaline and non-film forming solution offers the following features:

  • Highly water repellent.
  • Water vapour permeable, microporous.
  • UV and acid resistant, anti-static.
  • High weathering resistance.
  • Non-flammable.
  • No solvents and plasticisers added.
  • Resists algal and fungal growth.



Preparation & Application


Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed. Highly absorbent or friable substrates should be treated with Keim Soldalit Fixativ. A base coat of Keim Soldalit Grob is recommended for substrates which have repaired or filled areas.

Application
Keim Soldalit should be applied as a two coat undiluted system. Can be applied by brush, roller, or air-less spray with a minimum period of 12 hours between coats. For highly absorbent/roughcast substrates, Keim Soldalit can be diluted with a maximum of 10% by weight of KEIM Soldalit Fixativ.

Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain. 

Clean tools with water immediately after use.



Images of Keim Soldalit in Use


Keim Soldalit | Rawlins Paints



NBS Specifications


The NBS (National Building Specification) is a UK-based specification launched in 1973 and is used by building professionals and architects to describe the materials, standards and workmanship of a construction project. Keim provides documentation specific to this product that outline the NBS specifics. You can download these documents by locating the Keim Soldalit product at the following link: Download the NBS Documents Here

Product Details
KEI1027

Data sheet

For Use By
General Use
Application
Brush, Roller, Airless Spray
Coverage
Approx. 0.45kg/m2 for two coats.
Colour(s)
Fully Tintable
Base Type
Water-Based
Exterior / Interior Use
Exterior Use
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Michael Jones on 2022-05-26 00:24:51
Question: 

Hi I'm after a highly water resistant and very breathable paint, for new sand and cement render, but to also paint over another section of previously painted sand and cement render (previous paint was sandtex which has faded after 15 years). I was going to buy Emperor Paint which is a silicate paint I think, but my wife doesn't like the colours, and I've heard Keim paint is similar. The safety data sheet for the Emperor paint shows it's made in Germany so it's possible Keim is made in the same place or they are very similar. Which one of the Keim paints would I buy? I want to avoid primers if possible. many thanks

Answer: 

For this application assuming the new sand/cement render and the previously painted areas are clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Keim Royalan.

This is available in a range of colours in a matt finish.

questions Peter on 2021-09-19 13:29:14
Question: 

Hi, re Keim Soldalit, will it give me the same look as a lime wash does, ie flat. And when limewash exterior gets damp / wet with rain, temporarily darkens slightly in patches, does this do the same? Thanks

Answer: 

This is a matt finish mineral paint based on a binding agent combination of silica sol and potassium silicate and will not act or look like a lime wash.

questions Robin Vidler on 2021-08-11 10:29:59
Question: 

Hi looking for something to cover the block ghosting I'm getting through my 7 year old K Rend exterior walls. I already have the KRend topcoat paint (in ivory) but wondering whether a couple of coats of your paint would provide a longer-lasting solution? So can i use this as a base coat for covering with KRend masonry paint afterwards or is it an alternative to that (or both at the same time?) Thank you

Answer: 

Thank you for the enquiry, we have contacted you directly for more information.


Question about the product

* Required fields
(read)
Send