Keim Concretal Dilution, for concrete protection coatings KEIM Concretal W and KEIM Concretal Lasur. Reacts chemically with the surface. The product comprises of liquid potassium silicate and stabilisers.
This product/system requires site trials - Although readily available, please ensure a specification has been issued after site trials have taken place. The colour and degree of dilution affects the final finish and this must be known before purchase. Contact us for more infornmation on 0113 2455450 or [email protected]
Quick Links - Click To Jump To Section:
Features & Benefits
- Reacts chemically with the surface to which it is applied
- Suitable for use with the KEIM Concretal W and KEIM Concretal Lasur colourwash systems
- The product comprises of liquid potassium silicate and stabilisers
- Water vapour permeable
- Odourless and non-toxic
- Applied by brush or roller
- Can be overcoated by compatible products after a minimum of 12 hours
Product Properties
Material characteristics |
Density: |
Q =1.047g/cm3 |
Application Instructions
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM Mineral Paints may proceed.
Application
KEIM Concretal Dilution should be applied by brush or roller, working well into all surfaces. After a minimum period of 12 hours the KEIM Concretal W or KEIM Concretal Lasur system may be applied.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Consumption
Approx. 0.1 lt/m2.
Consumption rates are offered for guideline purposes only and are quoted for smooth rendered surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Cleaning of Tools
Clean tools with water immediately after use.