Fosroc Dekguard CP is a weather resistant, clear, water based impregnation and glaze for use on concrete.
It is designed to protect reinforced concrete from chloride ions, oxygen, carbon dioxide (CO²) and other aggressive chemicals.
Dekguard CP has a wide range of uses, e.g. multi-storey car parks, office buildings, industrial buildings, tunnels and bridges and it is also the recommended primer for Dekguard Elastic and Dekguard E2000.
The application of Dekguard CP should not commence if the temperature of the substrate is below +5°C and over +25°C
Dekguard CP should not be applied in windy conditions where early-age dust adhesion may occur, or where rain is likely within 2 hours at +20°C or within +20 hours at +5°C (up to 80% RH)
At low temperatures/high humidities, drying times will increase
Dekguard CP should not be considered for areas subjected to mechanical abrasion, e.g. traffic and foot traffic, or areas subjected to ponded water
Porous substrates may require further coats to obtain a uniform consistency of finish
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
7499-906258
Data sheet
Manufacturer
Fosroc
For Use By
Professional Use
For Use On
Concrete
Sheen
Matt
Single, Two or Three Pack
Single
Pack Size
10L
Application
Brush Roller Spray
Dry to Recoat (at 20°C)
2-4 hours at 20°C / 65% RH
Coverage
4m²/litre (per coat)
Min. Application Temperature
5°C
Shelf Life (from date of manufacture)
12 months provided the product is kept in a dry store in the original, unopened packaging. If stored at high temperatures and/or high humidity conditions the shelf life may be reduced.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Fosroc Dekguard CP is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Fosroc Dekguard E2000 is a crack-accommodating elastomeric protective coating for reinforced concrete and masonry structures. Designed to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there is a danger of subsequent cracks appearing within the...
Fosroc Dekguard Elastic is a high performance crack-bridging elastomeric acrylic protective and decorative coating for concrete and masonry conforming to the requirements of BS EN1504-2. Designed to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water, especially where there...