Glixtone EM18 Tough-Cote High Build Textured Final Finish Coating is an extremely durable, ready to use water based final finish textured coating. Suitable for internal and external use on virtually all common building substrates. Provides an extremely tough, flexible and long lasting protective and decorative finish. The textured finish deters vandals in public areas.
Extremely cost effective - Up to 15 years protection
Single coat, through colour finish - Matt, textured finish
Easy to apply by roller or trowel - Highly flexible and will conceal hairline cracks
Contains crushed marble aggregates for durability
UV protection for long lasting colour
Contains an extremely effective fungicide/algaecide to prevent organic growth
Fire Performance - Tested to BS476: Parts 6 and 7 and satisfies Class 0 requirements
Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
Please note:Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cart
Glixtone EM18 Tough-Cote High Build Textured Final Finish Coating is an extremely durable, ready to use water based final finish textured coating. Suitable for internal and external use on virtually all common building substrates. Provides an extremely tough, flexible and long lasting protective and decorative finish. It is also fast drying, rooms can normally be occupied within 24 hours.
Glixtone Tough-Cote High Build Textured Final Finish Coating is composed from tough, flexible water based resins, with crushed marble aggregates and lightfast earth pigments. It is environmentally friendly with excellent adhesion to all sound substrates. It is supplied ready for use with no mixing or stirring. A range of textured finishes can be achieved, please see the Product Data Sheet for further details.
Glixtone EM18 Tough-Cote High Build Textured Final Finish Coating offers exceptionally durable protection against even extreme weather conditions, and UV protection for long lasting colour. The textured finish hides surface defects and can help to deter vandals in public areas.
Extremely cost effective - Up to 15 years protection
Matt, textured finish - Single coat, through colour finish
Easy to apply by roller or trowel - Highly flexible and will conceal hairline cracks
Contains crushed marble aggregates for durability
Contains an extremely effective fungicide/algaecide to prevent organic growth
Environmentally friendly, water-borne formulation
Excellent adhesion to all sound substrates
Ready for use with no mixing or stirring
Self coloured - conceals chips
A range of textured finishes can be achieved
Exceptionally durable protection against even extreme weather conditions
UV protection for long lasting colour
Flexible film resists cracking and reduces maintenance costs
Fast drying - rooms can normally be occupied within 24 hours
Texture hides surface defects
Deters vandals in public areas
Internal absorbent surfaces can be sealed as follows: 1 coat Glixtone Sealer: SF1, diluted 1 part SF1 to 3 parts water by volume
Fire Performance - Tested to BS476: Parts 6 and 7 and satisfies Class 0 requirements
Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
For detailed information please see the Product Data Sheet and Application Guide
Important Application Methods
Method:
Apply to surface using a trowel in small sections and use a Plasterer’s Float to level for a smooth finish
Textured Method:
If a higher textured finish is required then ‘Lay Off’ the pre-applied surface with an unloaded ‘Honeycomb’ roller to produce a 'stripe' texture
Using VERY LIGHT even strokes a pattern will appear
The slower the roller speed then higher the peaks and the faster the lower
Always finish on the up stroke, in order to push the marble aggregate into a vertical position
This will ensure that the texture will have a ‘peaked’ effect when dry
This may require a little practice
Other types of patterning can be achieved using other ‘Plasters’ tools.
Be aware that the product does have a low ‘Working Time’ i.e. 20 minutes before ‘Skinning’ to provide Shower Proof protection.
Window reveals etc. can be finished with a brush in order to give a professional flat border finish.
This product can be built up in layers to the required thickness and will provide a THRU COLOUR FINISH.
Limitations
Do not apply outside the temperature range 5°C - 28°C
Do not apply when the temperature is likely to fall below 5°C within 4 hours
Do not apply externally in damp or humid conditions, when rain is likely within 6 hours
Do not apply below dpc (and do not bridge dpc)
Not recommended for application to external fletton bricks without suitable render coat preparation
Please refer to the Safety Data Sheet before use for detailed health and safety information
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Glixtone EM18 Tough-Cote High Build Textured Final Finish Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Glixtone Fungi-Shield Concentrated Sterilising Solution, approved by the National Residential Landlords Association (NRLA), destroys mould or fungi, sterilising prepared surfaces prior to the application of Glixtone Fungi-Shield Paint. Ideal for any internal areas that are susceptible to mould or organic growth including: walls, ceilings,...
Glixtone SF1 Sealer/Scrim Fixative is an emulsion based water borne sealer, when diluted 3:1 with water, for use on friable or absorbent masonry surfaces prior to the application of Glixtone EM18 Tough-Cote High Build Textured Final Finish Coating or Glixtone AC1 High Performance Smooth Masonry Paint. When used undiluted, SF1 is an effective...