Tenmat FF130 Luminaire Covers are fire rated covers or fire canopies designed to fire rate recessed luminaire or fluorescent module fixtures and reinstate the performance of ceilings when penetrated by recessed lights. They maintain the fire protection performance of the ceiling – preventing or delaying the spread of fire.

The covers are available to suit all common 600 x 600mm and 1200 x 600mm fixtures. The covers are ready to install, with no assembly required, and can even be retrofitted into position due to their flexible and durable design. They can be fitted from above or below the ceiling – through the diagonal in the ceiling grid, or folded for tight ceiling spaces.

The insulating nature of the covers also offers significant thermal and acoustic benefits to the ceiling system.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Ordering References
• Test Data
• Fitting Instructions

Features & Benefits

• Fire rated covers/fire canopies
• Designed to fire rate recessed luminaire or fluorescent module fixtures
• Reinstates performance of ceilings when penetrated by recessed lights
• Maintains the fire protection performance of the ceiling – preventing or delaying the spread of fire
• Available to suit all common 600 x 600mm and 1200 x 600mm fixtures
• Up to 60 minutes fire rating
• Provides thermal and acoustic insulation
• Lightweight and flexible, offering easy installation
• Can be retrofitted into position
• Ready to install - no assembly required
• Can be fitted from above or below the ceiling

Ordering References

Test Data

Fitting Instructions

For detailed fitting instructions for various applications please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected].

TENMAT’s FF130 Luminaire Cover is supplied ready to fit, and no assembly is required. With the cover in place, the modular light fitting can be installed as normal. The cover requires no maintenance and is easy to remove for maintenance of the light fitting.

• Pierce suitable holes in cover for cables to pass through.
• Note: cables should be a tight fit

• Pass cover diagonally through ceiling opening, or fold if the space is tight

• Ensure cover slots are located over ceiling grid, and cover sits flush with ceiling tiles
• Pass cables through pre-made holes, and fit light fitting as normal
• Transformers should be situated outside the cover

• In a fire situation, the cover prevents the fire from penetrating the ceiling for up to 120 minutes

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.