Tor Torrex Fire Upgrading Vinyl Silk Finish, a water based decorative fire retardant coating for use as the finish coats of the Torrex Fire Upgrading Vinyl Silk System.
For use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits
Use over existing multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire
A single pack pigmented PVA emulsion containing flame retardants
Water-based
Brush or roller application
30% volume solids
Very low VOC
Quick drying - touch dry in just 1 hour, hard dry in 6 hours (at 20°C)
1500+ colours in RAL, RAL Design, BS, NCS and the new NCS 2050 shades
Limitations:
Torrex Fire Upgrading Vinyl Silk must be applied at the specified spreading rate
Will only achieved fire upgrading properties if applied as part of the Torrex Fire Upgrading Vinyl Silk system
Torrex Fire Upgrading Systems can only be applied over sound well adhered multi-layered paint surfaces. Adhesion checks must be carried out before specification of the system
Do not apply and/or allow to dry at temperatures below 5℃
Do not apply if condensation is likely to occur
Drying times will be extended if temperature falls below 10℃
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Tor Torrex Fire Upgrading Vinyl Silk Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Fire retardant primer for the Torrex Fire Upgrading Systems. Used over multi-layered painted surfaces to reduce the spread of flame in communal areas in the event of a fire.Part of Torrex Fire Upgrading Systems A single pack pigmented urethane acrylic coating containing flame retardants Water-based Brush or roller application 45%...