Hempacore AQ 48860 is a one-component water-borne, chlorine free, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. No VOC (according to ISO11890-2) and is suitable for in-shop and on-site applications.
For professional use only
Use as intumescent fire protection for structural steel in interior use up to C2 conditions (ISO 12944-2: 1998): suitable for I-beams, I-columns and hollow columns, and as a repair and touch-up coating for damaged areas of freshly applied Hempacore AQ
Tested and approved according to EN13381-8 and BS 476-21 for up to 90 minutes fire protection. CE marked product with European Technical Assessment ETA 13/1054 according to ETAG018 Part 2.
Hempacore AQ 48860 is a one-component water-borne, chlorine free, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires.
Use as intumescent fire protection for structural steel in interior use up to C2 conditions (ISO 12944-2: 1998): suitable for I-beams, I-columns and hollow columns
Also use as a repair and touch-up coating for damaged areas of freshly applied Hempacore AQ
Tested and approved according to EN13381-8 and BS 476-21 for up to 90 minutes fire protection. CE marked product with European Technical Assessment ETA 13/1054 according to ETAG018 Part 2
Apply with airless spray or brush. Nozzle orifice: 0.017 - 0.023 " Nozzle pressure: 200 bar [2900 psi]
Can be used on steel, galvanised steel, thermal spray aluminium/zinc coated steel and stainless steel
Remarks
Only available in white, but can be top coated with an approved topcoat in any colour. If unsure contact our technical team at 0113 2455450 (option 2) or send a message to [email protected]
Can be over-coated with itself when additional thickness is required
Depending on the end use of the coating system, a topcoat may be required
For professional use only
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hempel Hempacore AQ 48860 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...