Envirograf Replacement Hardwood Door Edging
Envirograf Replacement Hardwood Door Edges are supplied to fit doors with a thickness between 40mm and 56mm, and it is supplied in 2100mm lengths. It is a complete door edge with concealed intumescent and smoke available for gaps 3mm, 5mm, 7mm and with brushes available for other gap sizes. Ideal for use in heavy-traffic areas prone to damage, such as hospital corridors or hotel lobbies.
Envirograf Replacement Hardwood Door Edging are supplied to fit doors with a thickness between 40mm and 56mm, and itis supplied in 2100mm lengths. It is a complete door edge with concealed intumescent and smoke available for gaps 5mm, 7mm, 10mm and with brushes available for other gap sizes.
Supplied with adhesive and full fixing instructions. The brush smoke seals are available in grey, black and white. Used where door edges are regularly damaged and therefore need maintenance (for example in hotels, hospitals and computer rooms) these easy fit, Envirograf Replacement Hardwood Door Edgings are ideal.
|ES46E (For doors between 50mm and 56mm thick)||46mm x 7mm||2100mm||5mm, 7mm or 10mm|
|ES56E||56mm x 7mm||2100mm||5mm, 7mm or 10mm|
Features & Benefits
- For use with door gaps of 5mm, 7mm, and 10mm
- Can be used in conjunction with brush seals for larger gaps
- Edging is supplied in a sapele finish as standard, but other finishes are available
- Ideal for use in heavy-traffic areas where door edging is prone to damage, such as hospital corridors or hotel lobbies
Remove the existing door edge with a sharp knife, chisel or saw, then rub down the edge with glass paper. If necessary (depending on the gap between door and frame), some planing may be required to allow for the replacement door edge. Replacement door edge fits flush one side (other side is wider to allow for planing down). Apply supplied glue to prepared door edge. Remove backing paper from self-adhesive strip on back of the replacement door edge. Press firmly into position. Hold the door edge firmly in place with masking tape while the glue sets (about 10-20 minutes). Finally, remove the masking tape and smooth down the projecting edge with a suitable plane and/or glass paper.
NOTE: For doors between 40-46mm thick use ES46E / for doors 50-56mm thick use ES56E.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!