Envirograf Surface Mounted Acoustic, Draught, Smoke and Weather Seals
Envirograf Rebated Acoustic, Draught, Smoke and Weather Seal is a 3mm deep x 10mm wide x 2100mm long aluminium or plastic holder containing a brush seal in various sizes and colours or a black rubber seal in various sizes and patterns. The holder has a self-adhesive backing for ease of fitting. The seal holder is rebated into wooden doors or windows and adhered to the surface of metal windows.
Please refer below for ordering references and information.
Envirograf Surface Mounted Acoustic, Draught, Smoke and Weather Seals are a surface fixed holder 2.1m long in a standard anodised aluminium finish, also available in a plastic holder in white, brown and black. The holder will accept various seals, brushes, acoustic tubes, angle and straight blades. Fitted onto door frames, the centre stiles of doors, around sash windows and glass doors to give smoke, weather, draught and acoustic protection.
Features & Benefits
- Gives full acoustic, draught, smoke and weather protection
- Can be fitted onto door frames or down the centre stiles of doors
- Can be fitted around casement or sash windows and glass doors
- Can also be used to provide protection around glass doors
|ES/SH||Aluminium holder||Anodised aluminium||2100mm|
|ES/SP||PVC holder||White, Brown, Black||2100mm|
|B||Brush seal||5mm, 7mm, 10mm|
|T||Rubber type tubular seal||6mm, 9mm|
|A||Rubber type angled blade||6mm, 9mm|
|S||Rubber type straight blade||5mm, 7mm, 9mm|
|V||Rubber type V blade||6mm|
To fit the self-adhesive seal, simply peel off the backing material to reveal the adhesive tape and press to the door frame where required. Secure with the panel pins supplied by fixing at each end and then at 300mm intervals along the length of the seal.
Note: ensure that new wood is sealed before adhering the holder.
Important – 1-1½mm of the brush or rubber seal is held within the holder. Brush with fin is always ½mm higher than regular brush. Make allowance for this when specifying.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!