Envirograf Rebated Intumescent Fire & Smoke Seals
Envirograf Rebated Intumescent Fire and Smoke Seals is an aluminium holder with intumescent fire and smoke seal, fitted into rebated fire doors or frames. Available in a 30 or 60min versions and in colours black, brown, grey or white. Able to accommodate both brush and rubber smoke seals, intumescent material fitted to ES/SM60 holders will provide additional fire protection.
Envirograf Rebated Intumescent Fire & Smoke Seals is an aluminium holder with intumescent fire and smoke seal, fitted into rebated fire doors or frames.
ES/SM30: 30 minutes fire-rated version, comprising a 7mm deep x 9mm wide x 2200mm long aluminium holder with a choice of brush or straight rubber seal. The brush smoke seals are available in black, brown, grey, or white and 5mm, 7mm, or 10mm high. The straight rubber seal is 4mm or 7mm high.
ES/SM60: 60 minutes fire-rated version comprising a 6mm deep x 20mm wide x 2200mm long aluminium holder with intumescent facing in aluminium with grey brush, black with black brush, brown with brown brush, red with grey brush, or white with white brush colours. Brush and rubber seal sizes as above.
ES/SM60/P: A plastic holder with intumescent material, 7mm deep x 20mm wide x 2200mm long in aluminium, black, brown, red, and white colours: for fitting into the rebate opposite ES/SM60, providing increased protection and sealing efficiency. The holder is rebated into wooden fire doors or frames, maintaining integrity and restricting the passage of fire and smoke in the event of a fire.
Features & Benefits
- Able to accommodate both brush and rubber smoke seals
- Intumescent material fitted to ES/SM60 holders will provide additional fire protection
- ES/SM60/P can be fitted opposite aluminium holders to provide increased protection and sealing efficiency
ES/SM60: Fit the aluminium profile into the rebate and fix with the nails supplied. Peel off the backing strip from the intumescent finishing piece and adhere is to the aluminium holder, thus hiding the heads of the fixing nails.
ES/SM60/P & ES/SM30: peel off the backing strip from the profile and adhere into the rebate.
IMPORTANT: The brush seal length must be between 1 – 1.5mm longer than the door gap between frame or adjacent double door.
1-1½mm of the brush or rubber seal is held within the holder. Brush with fin is always ½mm higher than regular brush. Make allowance for this when specifying.
See Envirograf Intumescent Hinge, Lock and Door Protection for details on ES/PLUG - intumescent fill plastic plugs offering 60 minutes protection of fixing screws.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!