Envirograf Glazing Bead System
Envirograf Glazing Bead System is a complete glazing systems consisting of 2100mm length timber beads coated and sealed with intumescent coating for fire doors/screens. All beads supplied in a PVC sleeve for transit. Supplied as standard without bolection moulding lip. Ideal for doors & screens. The beads can be over painted or varnished & they are supplied with the correct length pins or screws.
Envirograf Glazing Bead System is a complete glazing systems consisting of 2100mm length timber beads coated and sealed with intumescent coating for fire doors/screens.
- 10mm hardwood for 30min glazing with correct length pins
- 15mm softwood for 30min glazing with correct length pins
- 25mm hardwood for 60min glazing with correct length screws
All beads supplied in a PVC sleeve for transit. Supplied as standard without bolection moulding lip. Use the standard version with lip for partitions. Ideal for doors and screens. The beads can be over painted or varnished and they are supplied with the correct length pins or screws.
|30/G10/L||1/2 hour||10mm||2100mm||44mm||With Bolection Moulding Lip|
|30/G15/L||1/2 hour||15mm||2100mm||44mm||With Bolection Moulding Lip|
|60/G25/54/L||1 hour||25mm||2100mm||54mm||With Bolection Moulding Lip|
|60/G25/44/L||1 hour||25mm||2100mm||44mm||With Bolection Moulding Lip|
Features & Benefits
- Ideal for doors and screens
- Can be ordered with a bolection moulding lip
- Beads can be varnished or painted over for decorative purposes
- Standard version is ideal for use on partitions
The beads can be painted or varnished. Both systems are supplied with appropriately-sized fixing pins or screws for fixing at 200mm intervals along the length. (Pins are supplied for ½ hour rated system and screws for 1 hour rated system.) Pins and screws should be fixed at approximately 25° to vertical.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!