Envirograf Intumescent Door Stops
Envirograf Intumescent Door Stops are designed to upgrade doors and replace existing wooden door stops, to give 30/60 minutes fire and smoke protection. Moulding available in black, brown or white ready for staining. Can be used in new installations as a totally surface-mounted doorstop and smoke seal. Altenatively, the intumescent section can be routed into the door frame lining.
Envirograf Intumescent Door Stops are designed to upgrade doors and replace existing wooden door stops, to give 30/60 minutes fire and smoke protection. Moulding available in black, brown or white ready for staining. Can be used in new installations as a totally surface-mounted doorstop and smoke seal. Altenatively, the intumescent section can be routed into the door frame lining, with a rebate of 50mm x 3mm deep. Supplied as standard with a 5mm brush smoke seal. See Envirograf rebated acoustic, draught, smoke and weather seal (product 73) for alternative seals. All seals give smoke and draught protection.
Features & Benefits
- Designed to upgrade normal hollow-core doors and to replace existing wooden door stops, or used in conjunction with fire-rated doors to maintain integrity
- Can be fitted with acoustic seals which also serve as draught and smoke seals
- Provides up to 68 minutes integrity and insulation when used in a fire door
Remove the backing from the self-adhesive strip on the back edge of the seal, then position and finish with the panel pins supplied.
Can be used for new installations, as a combined surface-mounted doorstop, brush smoke seal and intumescent fire seal. Alternatively the intumescent section can be routed into the door frame lining, with a rebate of 3mm deep x 50mm wide. The standard smoke seal supplied is a 5mm brush. Rubber seals may also be used (see technical data sheet.) This product should be fitted to the most vulnerable doors (including non-fire-rated doors) such as dining room and kitchen. The smoke seal helps to ensure a fire escape route free from smoke and the intumescent seals the gap between the door and frame to inhibit the spread of fire.
DSU/S Single Door Set Contains;
2 x 2100mm pieces and 1 x 1050mm piece
DSU/D Double Door Set Contains;
3 x 2100mm pieces and 1 x 'ES25/HS' piece
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!