Astroflame Strip Intumescent Fire and Smoke Seals

    AST5315

    Intumescent fire and smoke seals for fire door assemblies for fitting into a rebate to either the eaves or the frame of a door. In the event of a fire the seal expands (intumesces) to many times its original volume and seals the gap around the door to provide a safe and effective barrier against the passage of fire, smoke, and hot gases.

    • Available as fire-only (FO) and with smoke seals (FS)
    • Alternative seals: Black Neoprene Rubber seals in single (SB) or twin blade (TB) configuration
    • Certifire Approved Fire Seals & Smoke Seals
    • Passed at BS476 Part 22 & 31.1
    • Smoke Seals to EN1634-3
    • 30 or 60-minute rated types
    • Available in various colours
    • Seals are sold per 2.1m and 1.05m lengths
    • All seals are supplied with self-adhesive backing tape
    • See below for ordering references and available colours
    • Please Note: Each Fire Door will have its own test evidence available from the door manufacturer. It is the responsibility of the purchaser to ensure that seals are fully compliant with the relevant test evidence.
    Colour
    Pick a Colour
    • Current colour: White
    Close colour picker
    • White
    • Black
    • Grey
    • Red
    • Brown
    Item
    £0.36(ex. VAT)
    £0.43 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Astroflame Strip Intumescent Fire and Smoke Seals, available as fire-only (FO) and with smoke seals (FS), and as alternative Black Neoprene Rubber seals in single (SB) or twin blade (TB) configuration.

    Intumescent fire and smoke seals for fire door assemblies. An intumescent graphite-based fire seal contained within a PVC sleeve for fitting into a rebate to either the leaves or the frame of a door. In the event of a fire the seal expands (intumesces) to many times its original volume and seals the gap around the door to provide a safe and effective barrier against the passage of fire, smoke, and hot gases.

    Astroflame Intumescent Fire Seals are available with or without a cold smoke seal in the form of a nylon pile. Astroflame smoke seals provide a permanent barrier to smoke - particularly important as smoke fumes travel faster and further than the fire itself.

    All Astro fire and smoke seals are supplied with a self-adhesive backing tape as standard to facilitate quick and easy fitting.

    Please Note: Each Fire Door will have its own test evidence available from the door manufacturer. It is the responsibility of the purchaser to ensure that seals are fully compliant with the relevant test evidence.



    Quick Links - Click To Jump To Section:




    Ordering References: Intumescent Fire Seals


    Product CodeTypeFire RatingProfile SizeLengthsColours
    AF1004 FOFire Only30 mins10mm x 4mm2.1m/1.05mBlack, Brown, Grey, Red, White
    AF1504 FOFire Only30 mins15mm x 4mm2.1m/1.05mBlack, Brown, Grey, Red, White
    AF2004 FOFire Only60 mins20mm x 4mm2.1m/1.05mBlack, Brown, Grey, Red, White
    AF2504 FOFire Only60 mins25mm x 4mm2.1m/1.05mBrown, White



    Ordering References: Intumescent Fire and Smoke Seals - Brush Type


    Product CodeTypeFire RatingProfile SizeLengthsColours
    AF1004 FSFire & Smoke Brush30 mins10mm x 4mm2.1m/1.05mBlack, Brown, Grey, Red, White
    AF1504 FSFire & Smoke Brush30 mins15mm x 4mm2.1m/1.05mBlack, Brown, Grey, Red, White
    AF2004 FSFire & Smoke Brush60 mins20mm x 4mm2.1m/1.05mBlack, Brown, Grey, Red, White
    AF2504 FSFire & Smoke Brush60 mins25mm x 4mm2.1m/1.05mBrown, White



    Ordering References: Intumescent Seals Fire and Smoke - Single Blade Seal


    Product CodeTypeFire RatingProfile SizeLengthsColours
    AF1004 SBFire & Smoke Single Blade30 mins10mm x 4mm2.1m/1.05mBrown, White
    AF1504 SBFire & Smoke Single Blade30 mins15mm x 4mm2.1m/1.05mBrown, White
    AF2004 SBFire & Smoke Single Blade60 mins20mm x 4mm2.1m/1.05mBrown, White



    Ordering References: Intumescent Seals Fire and Smoke - Twin Blade Seal


    Product CodeTypeFire RatingProfile SizeLengthsColours
    AF1004 TBFire & Smoke Twin Blade30 mins10mm x 4mm2.1m/1.05mBrown, White
    AF1504 TBFire & Smoke Twin Blade30 mins15mm x 4mm2.1m/1.05mBrown, White
    AF2004 TBFire & Smoke Twin Blade60 mins20mm x 4mm2.1m/1.05mBrown, White



    Features & Benefits


    • Certifire Approved Fire Seals & Smoke Seals
    • Passed at BS476 Part 22 & 31.1
    • Smoke Seals to EN1634-3
    • 30 or 60-minute rated types
    • Available in various colours
    • Seals are sold per 2.1m and 1.05m lengths
    • All seals are supplied with self-adhesive backing tape
    • Alternative seals: Black Neoprene Rubber seals in single or twin blade configuration



    Testing


    • Tested for 30 minutes with 10mm and 15mm to BS 476 part 22 & 31.1.
    • Tested for 60 minutes with 20mm and 25mm to BS 476 part 22 & 31.1.
    • Smoke seals tested to EN1634-3
    • Tested to 100,000 open/close cycles.



    IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

    Product Details
    5315-873967

    Data sheet

    Manufacturer
    Astroflame
    For Use By
    Professional Use
    For Use On
    Fire Doors
    Application Method
    Hand
    Pack Size
    1 pc.
    UN Number
    N/A
    Colour(s)
    Standard Colours
    Suitable For Use On
    Fire Doors
    Application Method
    Hand
    Manufacturer
    Astroflame
    Usages
    Fire Resistance
    Product Usage Type
    Intumescent Fire Seals
    Colour Family
    Red
    Colour Family
    Black
    Colour Family
    Grey
    Colour Family
    Brown
    Colour Family
    White
    Fire Rating
    30 Minutes
    Fire Rating
    60 Minutes
    Classification
    Certifire
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Astroflame Strip Intumescent Fire and Smoke Seals is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT