Envirograf 3-2-1 Special Fire Retardant Liquid is a clear, odourless, flame retardant liquid for spraying onto most absorbent plastics, nylon foliage, or flowers for example in hotels, hospitals, restaurants, Foyers and for Christmas Grotto materials. It has been tested to BS 5852 and when affected by flame, treated materials will turn black but will not hold a flame.
Envirograf 3-2-1 Special Fire Retardant Liquid is a clear, odourless, flame retardant liquid for spraying onto most absorbent plastics, nylon foliage, or flowers for example in hotels, hospitals, restaurants, Foyers and for Christmas Grotto materials. Envirograf 3-2-1 Special Fire Retardant Liquid has been tested to BS 5852 and when affected by flame, treated materials will turn black but will not hold a flame.
Preparation & Application
See product data sheets in the 'Download' section below.
Coverage can vary greatly depending on the type of substrate and absorbency.
For suitable applications, contact the Technical Department.
Trials in small areas must always be carried out prior to full application to ensure performance and appearance.
Seek approval from the relevant authority for this product/system including test data prior to purchase/use (test data available upon request).
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Do you have any product that can be used to treat leather on a door to achieve 20 minutes fire resistance. This for a conservation job. The doors are 44mm oak with 20mm infill panels with an original leather panel to inner face. Thanks Nathan Building Control
No. We have various options to upgrade timber on doors (Door Upgrade Kits) but not leather.
Andrew Mcghie on 06/02/2018
Which product is suitable for polystyrene ceiling tiles in a bathroom
Unfortunately, none of our fire protection products suitable for polystyrene ceiling tiles.
From the Flamebar product range, Bollom Flamebar S3 is a specially formulated, effective economical water-based flame retardant solution designed to improve safety on a range of portable absorbent textiles.
Hydron Nu-Flame Synthetic & Fabric Protector is for all types of fabrics and synthetic materials that require protection against fire. Water based and odourless as well as being safe on skin, ready to use fire retardant solution that is absorbed into the surface of the material. Achieves BS 5867 Part2 Type B & BS 5852 0 & 1. Easy to apply, and can be dry...
Thermoguard Thermoproof Interior Fluid is a clear, colourless, penetrating Fire Protection with an optional functional Thermoguard Thermoproof Interior Sealer for wear, damp & UV resistance available in clear or woodstain colours.
Thermoguard Thermoproof Exterior Fluid is a penetrating fire proof fluid for bare wood such as sleepers, fencing, cladding and decking. The weather resistant, water-based, non flammable formula enables safe application by untrained and inexperienced users.
From the Flamebar product range, Bollom Flamebar S1WA2 is a specially formulated, effective economical water-based flame retardant solution designed to improve safety on portable, natural materials.
Thermoguard Thermoproof Interior Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Interior Fluid where protection from wear, damp & UV resistance is required. Thermoguard Thermoproof Interior Sealer is available in clear or woodstain colours.
Nu-Flame Clear Impregnation is a fire retardant ready-to-use system that is absorbed into the surface of timber. Ideal for timber substrates that require Class '0' Spread of Flame or Euro class B.
Internal and external use
Not harmful to the environment
Will not wash out
12-month shelf life
Envirograf 3-2-1 Standard Fire Retardant Liquid is a clear, aqueous and odourless flame-retardant liquid for use on many absorbent materials.
Upholstery and wallpaper
Polyurethane furniture, settees, sofas
Carpets, curtains, and beds
Tents and canvas
Christmas trees - Living and artificial
Zeroflame Fire Retardant Treatment is for use on wood and timber:
Soaks virtually ‘invisibly’ into woods and timber
Achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers
Can be overcoated for decorative purposes
For internal and external use
Certificate application included
From the Flamebar product range, Bollom Flamebar PE6 is a specially formulated, effective economical water-based flame retardant solution designed to improve interior safety.