

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas such as stairwell, corridors and lift lobbies without the need to strip the current paint.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for communal areas such as stairwell, corridors and lift lobbies without the need to strip the current paint. Removing the existing paint system is expensive, time consuming and can be a health hazard when working in a confined space such as a corridor. The Nu-Flame fire retardant paint system reduces the need for chemical stripping of the walls. Nu-Flame is a water based system which presents no health hazards and reduced odours during the application.
This Walls and Ceilings package is comprised of the Heat Insulating Basecoat and a topcoat of your choice, depending on the finish required. The Matt finish is typically used for ceilings.
All packs achieve BS Class 1/0 Surface Spread of Flame protection and are for INTERIOR use only.
80m² Pack (Nu-Flame FU Standard - Matt Finish)
1 x 20KG Nu-Flame Heat Insulating Basecoat
1 x 10L Nu-Flame FR Colourcoat
Inspect and prepare in accordance with manufacturer’s instructions and apply:
80m² Pack (Nu-Flame FU Standard - Eggshell Finish)
1 x 20KG Nu-Flame Heat Insulating Basecoat
1 x 10L Nu-Flame FR Acrylic Eggshell
Inspect and prepare in accordance with manufacturer’s instructions and apply:
80m² Pack (Nu-Flame FU Standard - Scrubbable Finish)
1 x 20KG Nu-Flame Heat Insulating Basecoat
1 x 10L Nu-Flame FR Scrubbable Colourcoat
1 x 5L Nu-Flame FR Scrubbable Colourcoat
Inspect and prepare in accordance with manufacturer’s instructions and apply:
80m² Pack (Nu-Flame FU Standard - Anti-Bacterial Finish)
1 x 20KG Nu-Flame Heat Insulating Basecoat
1 x 10L Nu-Flame FR Anti-Bacterial Colourcoat
1 x 5L Nu-Flame FR Anti-Bacterial Colourcoat
Inspect and prepare in accordance with manufacturer’s instructions and apply:
80m² Pack (Nu-Flame FU Standard - Anti-Graffiti Finish)
1 x 20KG Nu-Flame Heat Insulating Basecoat
3 x 5L Nu-Flame AG Colourcoat
Inspect and prepare in accordance with manufacturer’s instructions and apply:
IMPORTANT NOTE FOR GLOSSY SURFACES
Glossy or old anti-graffiti surfaces will needed to be treated with the Hydron Nu-Flame SP Tack Primer first, before applying any of the packs above.
Nu-Flame Heat Insulating Basecoat
Nu-Flame Heat Insulating Basecoat is designed to insulate flammable paint systems and control surface spread of flame and fire propagation. Can be applied as a basecoat to a multitude of previously painted substrates, such as: plaster, Artex, board, brick and concrete walls & ceilings.
PREPARATION & APPLICATION
Rub down old paints thoroughly. Ensure surfaces are sound to provide a key, wash down and allow to dry. Do not apply in damp, cold conditions or when condensation may form on walls and ceilings. Apply by brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use.
Nu-Flame FR Acrylic Eggshell
Nu-Flame FR Acrylic Eggshell is a special formulation for concrete, timber and new or previously painted surfaces require an eggshell finish. Tested to BS 476 part 6 & 7 and satisfies Class '0' Requirements of current Building Regulations.
PREPARATION & APPLICATION
For use on doors, skirting and other timber finishes as well as painted surfaces and concrete to complement the Nu-Flame wall finishes. Ensure surfaces to be treated are clean, free from contamination and dry. Apply by brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use.
Nu-Flame FR Scrubbable Colourcoat
Nu-Flame FR Scrubbable Colourcoat is a matt paint finish with flame retardant properties. Ideal for internal use and is easy to clean. Perfectly suitable for both walls and ceilings, you have the peace of mind that this coating is highly durable. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Meets Class 1 of ISO 11998 for scrub resistance.
PREPARATION & APPLICATION
For use on walls and ceilings in high circulation areas where an easy clean coating is required. Ensure surfaces to be treated are clean, free from contamination and dry. Apply by brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use.
Nu-Flame FR Anti-Bacterial Colourcoat
Nu-Flame FR Anti-Bacterial Colourcoat is a water-based Anti-Microbial finish with flame retardant properties. Ideal for use in all hygiene sensitive areas and those susceptible to mould and fungus. Will provide active Anti-Microbial control for many commonly found bacteria, such as Salmonella, E-Coli, Listeria and MRSA. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Meets Class 1 of ISO 11998 for scrub resistance.
PREPARATION & APPLICATION
For use on walls and ceilings where a tough, scrubbable, Anti-Microbial coating is required to fight against infections caused by harmful bacteria. Ensure surfaces to be treated are clean, free from contamination and dry. Apply by brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use.
Nu-Flame FR Colourcoat
Nu-Flame FR Colourcoat is a flame retardant finish for walls and ceilings. The water-soluble coating is safe for internal use and is tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations. Additionally, you can apply this coating as a basecoat for use prior to multi-coloured finishes. Tested to BS 476 part 6 & 7 and satisfies Class ‘0’ Requirements of current Building Regulations.
PREPARATION & APPLICATION
For use on walls and ceilings. Intermediate coat of the Nu-Flame Multi-coloured System. Ensure surfaces to be treated are clean, free from contamination and dry. Apply by brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use.
Nu-Flame Anti-Graffiti Colourcoat
Nu-Flame AG Colourcoat is a pigmented and smooth fire retardant coating with excellent anti-graffiti properties, and serves as the final coat to the Nu-Flame Fire Protection Coating for walls and ceilings. The Nu-Flame fire retardant paint system reduces the need for chemical stripping of the walls, and because it's water-based, it presents no health hazards and odours are reduced during the application.
PREPARATION & APPLICATION
Final coat to the Nu-Flame Fire Protection Coating for walls and ceilings. Ensure surfaces to be treated are clean, free from contamination and dry. Apply by brush/roller or Airless Spray. All equipment should be cleaned with water immediately after use. Store away from direct sunlight and sources of heat. Protect from frost.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.