Nullifire FP150 Intumescent Pipe Collars
Nullifire FP150 Intumescent Pipe Collars stop the spread of smoke and fire along pipework that passes through compartment walls and floors.
- Certified to British & European standards BS EN 1366-3 and EN 13501: Pt 2
- Provides an effective fire & smoke barrier for up to 2 hours
- Simple installation
- Moisture resistant
- Designed for thermal movement
- This product is only available for 2-3 day Express delivery on Nullifire/Firetherm orders totalling £75 +VAT
Nullifire FP150 Intumescent Pipe Collars consist of galvanised steel shell lined with intumescent material. FP150 Pipe Collars are used to stop the spread of smoke and fire along pipework that passes through compartment walls and floors.
During a fire the intumescent expands within the steel casing and seals the pipe. FP150 Intumescent Pipe Collars are suitable for use in UPVC, PVC, ABS, PP, PE and Composite pipe penetrations through masonry floors and walls.
- Health centres
- Leisure facilities
- Commercial outlets
- Retail shops
- Industrial buildings
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!