Nullifire FS701 Waterborne Intumescent Acrylic Sealant
  • Nullifire FS701 Waterborne Intumescent Acrylic Sealant

Nullifire FS701 Waterborne Intumescent Acrylic Sealant

398961

Nullifire FS701 Waterborne Intumescent Acrylic Sealant is a one-part fire resistant joint sealant and can achieve up to 4 hours joint fire resistance tested in accordance with EN 1366-3, EN 1366-4 and ETAG 026. 

Colour
Size
£19.44
VAT excluded

£23.33 Tax incl.
Quantity

Description

Nullifire FS701 Waterborne Intumescent Acrylic Sealant is a one-part fire resistant joint sealant and can achieve up to 4 hours joint fire resistance tested in accordance with EN 1366-3, EN 1366-4 and ETAG 026. 

FS701 cures to give a firm, but flexible seal in low movement fire rated joints to seal between joints in FB747 FR Coated Batts, substrate to penetration service applications and pointing up of penetration seals. FS701 Sealant may be used to provide a linear joint or gap seal with specific supporting constructions and substrates and as a penetration seal. 

Substrates

  • Masonry to masonry
  • Masonry to timber
  • Masonry to steel
  • FB747 to flexible wall
  • FB747 to rigid wall
  • Flexible wall to flexible wall
  • Flexible wall to rigid floor
  • Rigid floor to rigid floor
  • Rigid wall to rigid wall 

Features & Benefits

  • Can achieve up to 4 hours joint fire resistance tested in accordance with EN 1366-3, EN 1366-4 and ETAG 026
  • Ideal for sealing low movement joints - suitable for gaps up to 50 mm wide
  • Suitable for rigid and flexible walls
  • Used for sealing FB747 Coated Fire Batts
  • Acoustics up to 61 dB
  • Air seal up to 600 Pa
  • Single sided seal tested
  • Easily paintable 

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
398961
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Envirograf Weather Bar Seal

Use a Weather Bar Seal to guard against weather and draughts under doors. Easy fix Applies to bottom edge of doors Use in conjunction with Envirograf Products 106 and 107

Price £5.94
In stock

Envirograf RSF Rainscreen Cavity Barriers

RSF Rainscreen Cavity Barriers for rainscreen & cladding; intumescent-impregnated fireproof sponge with water-resistant silver foil cover. Ventilation holes or a front-facing intumescent strip for gaps up to 50mm wide available. Refer to sizes below Ventilation holes only available for RSF/A/ 1m long Use horizontal or vertical...

Price £16.34
In stock

Envirograf Fireproof Paper for Lath & Plaster

Fireproof Paper provides fire protection to lath and plaster walls and ceilings, applying just like wallpaper. Use Sealoplast acoustic sponge and graphite cloth for repairing damage holes in lath and plasterboard ceilings. See sizes & accessories below Cloth and paper priced per metre Easy to apply

Price £35.11
In stock

Envirograf WB Non-Ventilated Cavity Barrier

WB Non-Ventilated Cavity Barriers for between brick or block walls. Upstand varieties can be made to order. Features intumescent that expands in fire, sealing gaps. Refer to sizes below Fit vertically & horizontally 1m & 2m lengths Use around window frames & door frames Ideal for UPVC windows & timber-framed houses Up...

Price £11.05
In stock

Envirograf Intumescent Non Fibrous Fire Stop Blocks

Intumescent Non Fibrous Fire Stop Blocks form fire and smoke barriers in walls and floors, ideal for computer rooms and sterile areas such as hospitals and laboratories. Easy to cut to shape Use around pipes and wires Expands in fire, sealing gaps Adhesive tape down both sides for easy joining Up to 2 hour fire protection Block sizes...

Price £47.58
In stock

Envirograf Cast in Concrete Pipe Sleeves

Cast in Concrete Pipe Sleeves with intumenscent lining for setting into concrete and bored holes to allow passage of services (cables, pipes, etc) through fire-rated floors. Refer to sleeve sizes below Includes removable end caps Caps can be cut to accomodate services Suitable for industrial and domestic use

Price £14.36
In stock

Envirograf Intumescent Fan Cover

Intumescent Fan Covers for electrical ventilation extractor fans in walls or glass, with a grille that expands in fire, sealing openings to prevent the spread of fire and smoke for up to an hour. See sizes below For wall-mounted and window-mounted electric fans Fits most leading makes - VentAxia, Xpelair, etc. Required under UK Building...

Price £151.68
In stock

Envirograf Soffit Board Intumescent Ventilator

These metal Soffit Board Intumescent Ventilators replace plastic soffit grilles, expanding in fire to fill gaps and voids to prevent the spread of fire to loft and roof areas. Refer to size guide below Circular and rectangular shapes Other sizes can be made to order

Price £13.99
In stock

Envirograf Welding Blankets and Pads

Welding Blankets and Pads help minimise splash damage from welding and using blow torches and lamps. Place pads behind services to protect walls, and hang blankets to protect areas from flames. Refer to size guide below Fibre-free Non-asbestos For continuous temperatures up to 600°C Withstands short-term temperatures of up to 1200°C

Price £53.02
In stock

Envirograf Envirofrax Non Intumescent Glazing Tape

Non Intumescent Glazing Tape for fire-rated glass in steel doors, partitions and windows, where intumescent properties aren't required. Ideal for high temperature insulation of various vehicle parts, such as silencers, catalytic exhausts, heat shields and gaskets. 15m rolls Easily installed with self-adhesive backing

Price £14.17
In stock

Envirograf HMG Ventilation Grilles

Ventilation with fire protection, HMG Ventilation Grilles fit into metal-cased windows for ceiling ventilation, or directly into glazing. Ideal for bathrooms and kitchens, the grilles have intumescent material that expands in fire to seal the grille completely shut. Refer to sizes below Easy to fit White or brown, with more colours &...

Price £41.04
In stock

Envirograf Intumescent Downlighter Cages

Intumescent Downlighter Cages provide fire protection in plasterboard and suspended ceilings, covering downlighters, transformers and loudspeakers. Other sizes made to order. Protects without overheating Easy to install in minutes, from below or above Loft covers available Refer to sizes below

Price £12.74
In stock

Envirograf Intumescent Coated Fireproof Sponge

This Intumescent Coated Fireproof Sponge is a new type of expansion joint that will char, not burn, in fire, making it an effective fire barrier. Coated in intumescent material to expand in fire, the sponge is non-fibrous making it ideal for use in hospitals and computer rooms. Refer to sizes below Easy to cut Supplied in 1m lengths and...

Price £5.51
In stock

Firetherm Intusleeve Duct

Firetherm Intusleeve, fire protection for plastic air ducts passing through fire compartment walls and fire barriers. Length of sleeve is relative to the width of the wall and the seal - this should be specified when placing an order. Intumescent-lined, crushing heat-softened ducts. Metal sleeves fit around ducting and slide into...

Price £8.60
In stock

Envirograf Firoblok Intumescent Conduit Sleeves

Firoblok Intumescent Conduit Sleeves for plumbing and electrical services passing through walls, floors or ceilings, providing up to 122 minutes fire and smoke protection. Fits into sockets or BESA Boxes For PVC, UPVC, steel and copper pipes Tested for thick UPVC pipes for nuclear power stations Cools steel, cast iron or copper pipes

Price £6.17
In stock

Firetherm Intubatt 3

Firetherm Intubatt 3, rock-fibre ablative-coated slabs for installing in floors or walls for up to 4 hours fire resistance. Low cost and simple install For vertical applications, only the double-coated option should be used Fully tested at Exova BM TRADA up to 4 hours fire integrity Easy to cut Fully identifiable using Optifire...

Price £22.56
In stock